Read Sony KV-SK29M80 Service Manual online
– 8 –
KV-SK29M80/H
RM-GA002
2-4. Dressing of Conn Assy, 5P YUV
2-6. Installation and dressing of Earth Assy, Coating
2-5. Dressing of Conn Assy, 4P VM
and Connector Assy, 5P Front In
CN003
CV
Dress Conn Assy, 5P YUV around shield case.
Use pin, wires A019 and A017 to dress Conn Assy,
5P YUV as shown
Use pin, wires A019 and A017 to dress Conn Assy,
5P YUV as shown
Dress Conn Assy, 4P VM behind Conn Assy, 5P Front
In as shown. Conn Assy, 5P Front In is used to prevent
Conn Assy, 4P VM from bending towards T504, R579
and R5032 (high temperature parts).
In as shown. Conn Assy, 5P Front In is used to prevent
Conn Assy, 4P VM from bending towards T504, R579
and R5032 (high temperature parts).
i) Earth Assy, Coating is installed as shown in
Figures (a) and (b).
Figures (a) and (b).
ii) Insert the 2 Earth Assy, Coating wires to CN705
& CN707 as shown.
iii) Insert Conn Assy, 7P RGB into CN701.
& CN707 as shown.
iii) Insert Conn Assy, 7P RGB into CN701.
Pin, wire A019
Make sure the UL tape is
positioned at
the sharp edge of shield case to
prevent wire from being scratched case
CN007
CN9201
CN905
Dress Conn Assy, 5P
YUV around shield
Keep wires
away
Pin, wire A017
Conn Assy, 5P YUV
Right side
Figure (a)
Figure (b)
Left side
CN701
Heatsink A751
Conn Assy, 7P RGB
Dress Conn Assy,
4P VM behind
conn Assy 5P Front In
Lead Assy, Earth is
above Conn Assy, 5P
Conn Assy,
5P Front In
5P Front In
Deflection area
T504
R503
R579
Conn Assy, 4P
CN9201
CAUTION:
Keep Conn Assy, 5P Front In away from deflection
area (T504, R5032, etc.) when dressing.
Keep Conn Assy, 5P Front In away from deflection
area (T504, R5032, etc.) when dressing.
CN707
CN705
Earth Assy,
Coating wires
Click on the first or last page to see other KV-SK29M80 service manuals if exist.