KV-SK29M80 - Sony TV Service Manual (repair manual). Page 10

– 9 –

2-9.  Dress Lead Assy, Earth and Conn Assy, 5P Front In with purse lock Ø 5

 

CRT neck

CRT

 

 

 

 

 

  

Insert Lead Assy, H Static into CRT socket and RV750 
as shown. Make sure the wire is naturally curved, to 
avoid touching CRT neck.

Make a 'S' shaped loop on Conn Assy, 5P Front In as 
shown. Keep wires away from heatsink A010.

Lead Assy, H Static

Lead Assy, Earth

Conn

Assy, 5P

Lead Assy,

Speaker

Heatsink

Lead Assy,

Lead Assy, Speaker is not dressed together

with purse lock. Keep Lead Assy, Speaker

away from heatsink A010 by
dressing it close to the CRT.

Conn Assy, 5P Front

Heatsink A010

Lead Assy, Earth

Conn Assy, 5P

Note: Dress while chassis is halfway docked into beznet.

Make a 'S' shaped loop on Conn Assy,

5P Front In and dress together with

Lead Assy, Earth using purse lock Ø 5.

CAUTION:
Prevent tie, cable from touching rear cover or any enclosures by
turning them away from it
--> avoid rattle sound. Also prevent tie, cable's end from touching
solder side of board.

RV750

Purse lock Ø

 5