KV-SK29M80 - Sony TV Service Manual (repair manual). Page 11

– 10 –

  

 

 

 

  

1) Dress Conn Assy, 6P and Conn Assy, 4P VM using
tie, cable at alignment hole 'B' on CV board as shown.
2) Dress Conn Assy, 4P 200V; Conn Assy, 6P;
Conn Assy, 4P VM; Lead Assy, G2 and Lead Assy, Focus
with purse lock Ø 5.

Dress Conn Assy, 7P RGB; Conn Assy, 5P Front In and
Lead Assy, Earth using purse lock Ø 9.
KeeP wires away heatsinks and high-temperature parts.

Purse lock

Conn Assy, 7P RGB

Lead Assy, Earth

is behind Conn Assy,

7P RGB

Conn Assy, 6P

Tie, cable at alignment hole 'B'

Conn Assy, 4P VM

Conn Assy, 4P 200V

Lead Assy,

G2

Pin, wire A707

Conn 

Assy

, 4P

 VM

Conn 

Assy

, 4P

 200V

Conn Assy

, 

6P

Lead Assy

,Focus

Lead Assy

, 

G2

Lead Assy,

Focus

Purse lock 

Ø

Conn Assy, 7P RGB

Lead Assy, Earth

Conn Assy, 5P

Purse lock 

Ø

 5 

Purse lock 

Ø

 9

Prevent tie, cable from touching rear cover or any
enclosures by turning them away from it
--> avoid rattle sound. Also prevent tie, cable's end from
touching solder side of board.

Conn Assy, 5P Front In

CN004

Make loop of Conn Assy, 7P RGB as

large as possible when dressing with purse lock

Keep Conn Assy, 5P Front In

wire in an upward path from

CN9201 to where it is dressed

with purse lock 

Ø

 9. This is to

keep it away from deflection area.

Lead Assy, Earth