Read Sony KV-HP213M83 Service Manual online
– 9 –
KV-HP213N63,N63/S,M83
RM-GA002
2-3. Mount Caution on A & H3 board
W068
W069
R828
R829
R889
Ensure UL wire does not touch high
temperature resistors R828, R829 & R889
temperature resistors R828, R829 & R889
UL wire
P/N 1-923-082-52
CAUTION:
1) Make sure wires are kept away from sharp edges & heatsinks
2) Keep UL wire close to board surface
3) Make sure wires are kept away from high-temperature parts
4) Ensure wires do not get punched by ICT jig (modify ICT jig if applicable)
2) Keep UL wire close to board surface
3) Make sure wires are kept away from high-temperature parts
4) Ensure wires do not get punched by ICT jig (modify ICT jig if applicable)
UL wire P/N 1-923-082-52 on A Board (W068-W069)
A Board
W051
W052
Keep UL wire close to
board surface --> vertical
seam improvement
board surface --> vertical
seam improvement
UL wire on A Board (W051-W052)
Refer to printing:
GRAY wire to
Pin 3 (KEY)
GRAY wire to
Pin 3 (KEY)
Refer to printing:
WHITE wire to
Pin 1 (GND)
WHITE wire to
Pin 1 (GND)
Connector Assy, 3P
P/N: 1-910-031-76
CAUTION:
Make sure Connector Assy, 3P (P/N: 1-910-031-76)
is inserted to correct pins:
--> WHITE wire to Pin 1
--> GRAY wire to Pin 3
--> Pin 2 is NOT connected
Make sure Connector Assy, 3P (P/N: 1-910-031-76)
is inserted to correct pins:
--> WHITE wire to Pin 1
--> GRAY wire to Pin 3
--> Pin 2 is NOT connected
A Board
H3 Board
Click on the first or last page to see other KV-HP213M83 service manuals if exist.