Read Sony KV-HG21M85 Service Manual online
– 13 –
KV-HG21M81/HG21M85
RM-GA002
CAUTION FROM TVSR REQUIREMENT:
All the connectors must be 10mm (min) far away from FBT.
All the connectors must be 10mm (min) far away from FBT.
SAFETY
OPERATION
1. Dress Lead Assy, G2 + Focus as shown.
Insert G2 lead assy to FBT
Pull G2 Lead assy (2x)
Lead Assy, G2
Lead Assy, Focus
G2 Lead Assy
Focus Lead Assy
2. Insert focus lead assy to FBT
3. Pull Focus lead assy (2x)
3. Pull Focus lead assy (2x)
Push down lead assy focus rubber cap to cover the FBT flange.
Dress G2, Lead Assy to CN704 (CV PWB)
Push Rubber
CV PWB
CAUTION:
Make sure Lead Assy, G2 kept towards right to prevent PWB guide
rib at rear cover form hitting Lead Assy, G2 during rear cover docking.
Make sure Lead Assy, G2 kept towards right to prevent PWB guide
rib at rear cover form hitting Lead Assy, G2 during rear cover docking.
SAFETY
OPERATION
CAUTION FROM TVSR REQUIREMENT:
Make sure G2 lead assy is fully inserted.
Make sure G2 lead assy is fully inserted.
FBT
CAUTION:
Make sure Focus lead assy does not came off.
Make sure Focus lead assy does not came off.
CAUTION:
Make sure wire does not touch sharp edges,
heat sink & other high temperature parts on A PWB.
Make sure wire does not touch sharp edges,
heat sink & other high temperature parts on A PWB.
FBT
Rubber Tube
CAUTION:
Make sure G2 Lead Assy is fully inserted and cover by Insulation tube
Make sure G2 Lead Assy is fully inserted and cover by Insulation tube
CN704 (CV PWB)
INSULATION TUBE
SAFETY
OPERATION
SAFETY
OPERATION
SAFETY
OPERATION
2-13. Dress Lead Assy, G2 & Focus
2-14. Insert G2 Lead Assy
2-15. Insert Focus Lead Assy to FBT
2-16. Insert G2 Lead Assy at CN704
(CV
(CV
PWB)
SAFETY
OPERATION
Click on the first or last page to see other KV-HG21M85 service manuals if exist.