KV-HG21M85 - Sony TV Service Manual (repair manual). Page 12

– 11 –

CAUTION:
1) Make sure the HV Holder, Combi slit is facing
  opposite the DGC.
2) Make sure the distance between HV Lead Assy 
  from conductive parts 1mm/kv or 30mm

CAUTION:
Make sure wire does not touch HS ( IC751), sharp edges
heat sink & other high temperature parts on A PWB.
Make sure cable tie end facing toward CRT (to avoid
rattle sound if it towards the rear cover)

1. Fix HV Holder Combi to DGC using its hook as shown.

Bigger hook for Aluminium DGC (Part no. 1-457-281-11)
Smaller hook for Copper DGC ( Part no. 1-456-280-11)

2. Dress the HV Holder Combi & DGC with purse lock Ø9
    as shown.

Dress Conn. Assy 7p with Cable Tie at hole"A" (1x)
as shown.

Purse Lock 

9 (1X)

DGC Top

(Right)

HV Cable 
Combi 

When hooking HV holder combi to DGC, hook at the
curvy part of DGC finding the most suitable position
without giving any stress/deformation on HV holder combi

Hook HV Holder Combi to DGC using
the bigger diameter hook.

CV PWB

Conn. Assy 7P
CN004  (A PWB)

CN701
(CV/C PWB)

CABLE TIE

 

CONNECTOR ASSY 7P

CABLE TIE

(1X)