Read Sony DSC-P73 (serv.man8) Service Manual online
LEVEL
2
SERVICE MANUAL
DSC-P73
Ver 1.3 2006.08
DSC-P73
Sony EMCS Co.
9-876-733-85
2006H0500-1
© 2006.8
Published by Kohda TEC
• Addition of “2-5. Method of Exchanging Barrier Unit”
• Change of Repair Parts
US Model
Canadian Model
AEP Model
UK Model
E Model
Hong Kong Model
Australian Model
Chinese Model
Korea Model
Argentine Model
Brazilian Model
Tourist Model
Japanese Model
SUPPLEMENT-2
File this supplement with the service manual.
(DI06-045)
— 2 —
DSC-P73
2-5. METHOD OF EXCHANGING BARRIER UNIT
SECTION 2
DISASSEMBLY
1
Switch on a power supply.
3
Switch off a power supply by taking out a battery
or cut off a power supply from AC daptor.
(without using camera's power swich)
or cut off a power supply from AC daptor.
(without using camera's power swich)
4
Pinch A portion with finger
and fit a driver over a hollow.
and fit a driver over a hollow.
A
2
Push zoom button and transform the lens
as shown below.
as shown below.
5
Ornamental fixed plate (A)
7
Barrier unit
6
Two screws
(M1.4
(M1.4
× 4.5)
[BARRIER OPERATION TEST METHOD]
After the barrier unit is replaced, check the following items with turning the power of the set ON/OFF.
• The lens moves out and the barrier shutters open completely when the power is turned on.
• The lens moves in and the barrier shutters close completely when the power is turned off.
Checking condition is 1 downward 2 45
• The lens moves out and the barrier shutters open completely when the power is turned on.
• The lens moves in and the barrier shutters close completely when the power is turned off.
Checking condition is 1 downward 2 45
° downward 3 horizontal 4 45° upward 5 upward; totally five posi-
tions and check three times for each position.
The test needs to be performed only when the barrier unit is replaced.
No performance of this test is needed when the lens is replaced.
No performance of this test is needed when the lens is replaced.
1
downward
2
45
° downward
3
horizontal
4
45
° upward
5
upward
3X
3X
3X
3X
3X
— 3 —
DSC-P73
1
X-3954-369-1 CABINET (FRONT) ASSY (520S) (SILVER)
1
X-3954-370-1 CABINET (FRONT) ASSY (520B) (BLUE)
(EXCEPT J)
SECTION 5
REPAIR PARTS LIST
5-1. EXPLODED VIEWS
&
: Points added portion.
: Points changed portion.
: Points changed portion.
1
X-3954-369-2 CABINET (FRONT) ASSY (520S) (SILVER)
1
X-3954-370-2 CABINET (FRONT) ASSY (520S) (BLUE)
(EXCEPT J)
65
3-709-683-01 PLATE (A), ORNAMENTAL FIXED
66
3-709-676-01 MATERIAL, FIXED PLATE ADHESION
67
3-709-678-01 TITE (B TITE M1.4X4.5), TAP
68
3-709-677-01 BARRIER UNIT
Page
Former
New
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
5-2
)
5-3
1
2
3
6
4
6
5
9
)
1
2
3
6
4
6
5
51
51
68
67
66
65
)
)
+
+
)
)
)
— 4 —
DSC-P73
5-2. ELECTRICAL PARTS LIST
A-7113-094-A CD-500 BOARD, COMPLETE
***********************
< CONNECTOR >
CN801 1-817-942-11 CONNECTOR, FPC (ZIF) 39P
A-7113-092-A SW-419 BOARD, COMPLETE
************************
< CONNECTOR >
CN201 1-817-942-11 CONNECTOR, FPC (ZIF) 39P
CN203 1-794-410-11 CONNECTOR, FPC (ZIF) 27P
CN203 1-794-410-11 CONNECTOR, FPC (ZIF) 27P
< RESISTOR >
R205
1-208-707-11 METAL CHIP
10K
0.5%
1/16W
Page
Former
New
Ref. No.
Part No.
Description
A-7113-094-A CD-500 BOARD, COMPLETE
***********************
< CONNECTOR >
* CN801 1-817-942-51 CONNECTOR, FPC (ZIF) 39P
A-7113-092-A SW-419 BOARD, COMPLETE
************************
< CONNECTOR >
* CN201 1-817-942-51 CONNECTOR, FPC (ZIF) 39P
CN203 1-794-410-51 CONNECTOR, FPC (ZIF) 27P
< RESISTOR >
R205
1-208-911-11 METAL CHIP
10K
0.5%
1/16W
Ref. No.
Part No.
Description
5-6
5-8
