Read Sony KD-32NX200U Service Manual online
- 17 -
2-8. Service Position
To place the chassis in the service position, remove the
speaker assembly box (see 2-2.), remove the G1 and D2
brackets and position on the side of the main bracket as shown
above. Insert the main bracket firmly into the T-slot located on
the left corner of the beznet as indicated (see inset). To gain
access to the underside of the boards follow the instructions
on page 19. [Removal and Replacement of the main bracket
bottom plates].
speaker assembly box (see 2-2.), remove the G1 and D2
brackets and position on the side of the main bracket as shown
above. Insert the main bracket firmly into the T-slot located on
the left corner of the beznet as indicated (see inset). To gain
access to the underside of the boards follow the instructions
on page 19. [Removal and Replacement of the main bracket
bottom plates].
2-9. Wire Dressing 1
To avoid damage to the ground interconnecting leads from the
sharp edges of the heatsink they must be dressed as shown
above between the rear of the heatsink and the tuner.
sharp edges of the heatsink they must be dressed as shown
above between the rear of the heatsink and the tuner.
2-10. Wire Dressing 2
The sheathed end of the ground connecting lead must be
plugged into the F3 board to avoid the possibility of the AC
mains power touching ground.
plugged into the F3 board to avoid the possibility of the AC
mains power touching ground.
2-11. Wire Dressing 3
Ensure that wires do not touch heatsinks and high temperature
hotspots. All wires must be kept at a minimum distance of
20mm away from the EHT lead
hotspots. All wires must be kept at a minimum distance of
20mm away from the EHT lead
20mm
20mm
Click on the first or last page to see other KD-32NX200U service manuals if exist.