KD-32NX200U - Sony TV Service Manual (repair manual). Page 12

OK

1

4

7

3

6

9

2

5

8

8

0

VTR

TV

DVD

To check which mode you are in, press the 

 button on the remote control. If you are

watching a digital programme, an Info display appears on screen providing brief details
for the current and next programme. If this happens, press the DIGITAL/

 button on

the remote control to switch to analogue channels. 

The ‘Manual Programme Preset’ option in the ‘Manual Set Up’ menu allows you to
manually tune in channels. With the ‘Manual Programme Preset’ option highlighted,
press 

b

 to enter the ‘Manual Programme Preset’ menu. Press 

v 

or 

V 

to highlight the

channel you wish to tune. Press 

b

 twice to select the SYS column. Press 

v 

or

V 

to

select the TV broadcast system (Choose I for TV broadcasts or EXT for an external
input source). Press 

b

 to confirm and select the CH column. Press 

v 

or

V 

to select the

channel tuning (C for terrestrial channels, S for cable channels or F for direct frequency
input). Press 

b

 to confirm. You now need to tune the channel by one of the following

methods:

(a)

If you know the channel number of the TV broadcast, the VCR test signal or the
frequency:
Press the numbered buttons on the remote control to enter the channel number.
Press OK to store.

(b)

If you do not know the channel number:
Press 

v

 to select SEARCH. The TV set automatically searches for the next

available TV broadcast channel or the VCR test signal. When a channel has
been found press either OK to store or 

v

 to continue searching.

(c)

For external input sources (EXT):
Press 

v

 to select AV1, AV2, AV3, or AV4 depending on which socket you have

connected your equipment to. Press OK to store.

Naming a channel
Names for channels are usually taken automatically from Teletext (if available). This
name is displayed briefly on screen when the channel is selected. The ‘LABEL’ option in
the ‘Manual Programme Preset’ menu allows you to assign a name of your choice up to
5 characters or numbers.  With the ‘Manual Programme Preset’ option highlighted,
press 

b

 to enter the ‘Manual Programme Preset’ menu. Press 

v 

or 

V 

to highlight the

channel number you require. Press 

b

 repeatedly to select the LABEL column. Press 

v

or

V 

to select the first character. Press 

b

 to confirm this character. Select the other

characters in the same way. After selecting all required characters, press OK to store.

Skipping a channel
The ‘SKIP’ option in the ‘Manual Programme Preset’ menu allows you to skip unused
channel positions when selecting channels with the PROG+/-  buttons. However, you
can still select skipped channels by using the numbered buttons on the remote control.
With the ‘Manual Programme Preset’ option highlighted, press 

b

 to enter the ‘Manual

Programme Preset’ menu. Press 

v 

or

V 

to highlight the channel number you require.

Press 

b

 to select the SKIP column. Press 

v 

to select On (select Off to remove the SKIP

feature). Press OK to store.

VTR

TV

DVD

A ‘Memory Stick’* is a new recording medium with a data capacity that exceeds a
floppy disk.  It is specially designed for exchanging and sharing digital data among
‘Memory Stick’ compatible products. Use ‘Memory Stick’ to display JPEG pictures
(DCF version 1.0 format)** individually or as a slideshow presentation on the TV
screen. Because it is removable, ‘Memory Stick’ can also be used for external data
storage.

Insert a memory stick into the front control panel of the TV set until it clicks into the
connector. The 

v

 symbol must be facing forwards. The red light flashes indicating that

the memory stick contents are being read.

Confirm that the red light is off. Do not pull the memory stick. You must push the
memory stick and then release. The memory stick will spring out. 

Note:
*

Data stored on a ‘Memory Stick’ may become damaged or erased if you remove the
‘Memory Stick’ when it is reading or writing data.

The ‘Memory Stick’ menu is displayed automatically when you insert the memory stick
into your TV set.  Alternatively, if there is a memory stick already inserted, press the
MEMORY STICK button on the remote control to display the menu screen. There are
3 options available, namely ‘Index’, ‘Slideshow’ and ‘Setup’.

Notes:
*

Memory Stick’ and the 

 logo are trademarks of Sony Corporation.

** 

DCF (Design rules for Camera File systems) is a standard file name format for digital still
cameras, DV camcorders etc.  It is supported by SONY and other manufacturers.