Read Sony KD-32DC11U Service Manual online
- 10 -
Advanced Operation
Using the TV menu
system
system
Use the following buttons to operate the TV menu system.
The individual menus are explained on the following pages.
Picture Adjustment menu
1.
To
Press
Access the TV menu system...
MENU button.
Highlight an option...
V or v buttons.
Enter the highlighted menu or
option...
option...
b button.
Return to the last menu or option...
B button.
Alter the settings of a selected
option...
option...
V, v, B or b buttons.
Store settings/changes...
OK button.
2.
Press the MENU button to return to normal TV operation.
Mode
This option allows you to choose between three picture mode settings:
This option allows you to choose between three picture mode settings:
Live
Movie
Personal
Movie
Personal
For watching live broadcasts.
For watching movies.
Allows you to store your own preferred settings.
For watching movies.
Allows you to store your own preferred settings.
With the ‘Mode’ option highlighted, press the
b button to adjust. Press the V or
v button to select the required mode. Press the OK button to confirm.
Contrast, Brightness, Colour, Sharpness, Hue
These options allow you to adjust the contrast, brightness, contrast, sharpness
and hue.
Contrast, Brightness, Colour, Sharpness, Hue
These options allow you to adjust the contrast, brightness, contrast, sharpness
and hue.
‘Sharpness’ is not adjustable in digital mode. ‘Hue’ is only available when
viewing an NTSC colour signal, e.g. USA video tapes.
viewing an NTSC colour signal, e.g. USA video tapes.
With the required option highlighted, press the
b button to adjust. Press the B or
b button to set the level. Press the OK button to confirm.
Reset
This option resets all picture settings to the factory preset levels.
Reset
This option resets all picture settings to the factory preset levels.
With the ‘Reset’ option highlighted, press the OK button to restore default picture
settings.
settings.
The ‘Picture Adjustment’ menu.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
OK
button
button
V, v, B, and b
buttons
MENU
button
button
Advanced Operation
Detail Set Up menu
Auto Format
This TV can detect the type of screen format being transmitted by the
broadcaster (only if the specific signals are transmitted with the program). This
option allows the TV to automatically switch to the correct screen mode.
This TV can detect the type of screen format being transmitted by the
broadcaster (only if the specific signals are transmitted with the program). This
option allows the TV to automatically switch to the correct screen mode.
With the ‘Auto Format’ option highlighted, press the
b button to adjust. Press the
V or v button to select ‘On’ or ‘Off. Press the OK button to confirm.
Noise Reduction
Sometimes a weak signal can produce a snowy picture (called picture noise).
This option can help to reduce this effect.
Noise Reduction
Sometimes a weak signal can produce a snowy picture (called picture noise).
This option can help to reduce this effect.
With the ‘Noise Reduction’ option highlighted, press the
b button to adjust. Press
the
V or v button to select ‘Auto’ or ‘Off. Press the OK button to confirm.
AV2 Output
This option allows you to set a signal to be output through the socket labelled
This option allows you to set a signal to be output through the socket labelled
i2/r on the rear of the TV. If you connect a VCR to the i2/r socket, you
can then record from equipment connected to other sockets of the TV.
can then record from equipment connected to other sockets of the TV.
z
For example, to record from a camcorder to a video tape:
Connect a camcorder to the
Connect a camcorder to the
t3 sockets on the front of the TV and a VCR to the
i2/r socket on the rear of the TV. Set the ‘AV2 Output’ option to ‘AV3’. Press
the
t/
button repeatedly until
t2 is displayed. Press ‘PLAY’ on the
camcorder. The picture is sent through the AV2 socket to the VCR. Change the
channel on the VCR until the picture from the camcorder appears. Press
‘RECORD’ on the VCR.
channel on the VCR until the picture from the camcorder appears. Press
‘RECORD’ on the VCR.
With the ‘AV2 Output’ option highlighted, press the
b button to adjust. Press the
V or v button to select ‘A-TV’, ‘D-TV’, ‘AV1’, ‘AV3’, ‘YC3*’ or ‘AUTO’. Press the
OK button to confirm.
OK button to confirm.
Setting
Function
A-TV
Outputs an analogue broadcast.
D-TV
Outputs an digital broadcast.
AV1
Outputs signals from equipment connected to the
i1/
socket.
AV3
Outputs signals from equipment connected to the
t3 socket.
YC3*
Outputs signals from equipment connected to the
r
3 socket*.
AUTO
Outputs whatever is being viewed on the TV screen.
RGB Centring (only available when the TV is receiving a RGB signal)
When viewing a RGB signal from equipment connected to the
When viewing a RGB signal from equipment connected to the
i1/
socket
(e.g. DVD player, PlayStation2), the picture position may need some adjusting.
This option allows you to adjust the horizontal picture position so that the picture
is in the middle of the screen.
This option allows you to adjust the horizontal picture position so that the picture
is in the middle of the screen.
With the ‘RGB Centring’ option highlighted, press the
b button to adjust. Press
the
V or v button to adjust the fine tuning over a range of -10 to +10. Press the
OK button to confirm.
Picture Rotation
Due to the Earth’s natural magnetism, the picture might look slanted. This option
allows you to cancel this effect.
Due to the Earth’s natural magnetism, the picture might look slanted. This option
allows you to cancel this effect.
With the ‘Picture Rotation’ option highlighted, press the
b button to adjust. Press
the
V or v button to adjust the fine tuning over a range of -5 to +5. Press the
OK button to confirm.
Radio Mode
This option reduces the brightness and contrast settings when the current
channel is a digital radio service**.
This option reduces the brightness and contrast settings when the current
channel is a digital radio service**.
With the ‘Radio Mode’ option highlighted, press the
b button to adjust. Press the
V or v button to select ‘Auto’ or ‘Off’. Press the OK button to confirm.
The ‘Detail Set Up’ menu.
Detail Set Up
OK
Auto Format:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Radio Mode:
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
Radio Mode:
On
Auto
A-TV
0
0
Off
Auto
A-TV
0
0
Off
z
**Brightness and contrast are reduced
after one minute.
after one minute.
Press any button on the remote control
(except
(except
2+/-) to return the picture
settings to normal levels.
z
*Only for KD-28DX51U / KD-32DX51U
models.
models.
Click on the first or last page to see other KD-32DC11U service manuals if exist.