KD-32DC11U - Sony TV Service Manual (repair manual). Page 7

Read Sony KD-32DC11U Service Manual online

- 7 -
Getting Started
1.
Press the 
a button to switch to analogue mode.
In analogue mode, the channel number appears in green lettering when 
the channel is changed.
2.
Press the DIGITAL button to switch to digital mode.
In digital mode, an information banner appears briefly on screen when 
the channel is changed.
The banner may contain some of the following icons to provide 
information on the current programme*.
Interactive service is available (MHEG or MHP Digital Text).
Interactive service is currently disabled (MHEG or MHP Digital 
Text).
Radio Service.
Scrambled/Subscription service.
Multiple audio languages available.
Subtitles available.
Hard of Hearing subtitles available.
Recommended minimum age for current programme (from 4 to 18 
years).
Parental Lock.
Current programme is being recorded.
Switching between digital and analogue mode
6
The digital mode banner.
Information icons
Getting Started
1.
Connect the TV plug to your mains socket (220 - 240V AV, 50Hz)
2.
Push in the On/Off button (labelled 
!) on the front of the TV.
If the red standby mode indicator on the front of the TV is lit, press the TV I/
button on the remote control to switch on the set. Please be patient as the picture 
may take a few moments to appear on the TV screen.
1.
When you switch on the TV for the first time a language menu appear on 
screen with the word ‘English’ highlighted. Press the 
V or v button to 
highlight the language you require. Press the OK button to confirm. From 
now on all menus will appear in your chosen language. 
2.
The ‘Picture Rotation’ menu appears on the screen asking you to check 
if the picture is slanted. (Sometimes the Earth’s natural magnetism can 
cause the screen to look slanted.)
a) If no correction is required, press the 
V or v button to highlight ‘Not 
necessary’. Press the OK button to continue.
b) If some correction is required, press the 
V or v button to highlight 
‘Adjust now’. Press the OK button to continue. Press the 
V or v button 
to correct the slant. Press the OK button to store.
3.
The autotune prompt appears. Press the OK button to select ‘Yes’. The 
autotune procedure begins.
4.
The digital autotune display appears on screen and the TV starts to 
search for all the available digital channels. This may take some time, 
please be patient and do not press any buttons on the TV or remote 
control.
If no digital or analogue channels are found, a message appears asking 
you to confirm that the aerial is connected correctly. Check all the aerial 
connections and press the OK button to start the autotune procedure 
again.
When the digital autotune is complete, the analogue autotune starts to 
search for all the available analogue channels.
Once all available digital and analogue channels have been stored, the 
TV returns to normal operation, displaying the digital channel stored on 
channel number 1. If no digital channels are found, the analogue channel 
stored on channel 1 is displayed.
The TV has now tuned
in all the available channels
Automatically tuning the TV
5
The ‘Picture Rotation’ menu.
The ‘Autotune’ prompt.
Switching on the TV
4
Do you want to start 
automatic tuning?
Yes
No
OK
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
OK
KD-28DL11U
KD-28DX51U / KD-32DX51U
On/Off button
On/Off button
KD-32DC11U
On/Off button
The operating instructions mentioned here are partial abstracts from the ‘Operating
Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain
as in the manual.
SECTION 1
 
GENERAL
Page of 82

Click on the first or last page to see other KD-32DC11U service manuals if exist.