DPP-SV88 - Sony Other Service Manuals Service Manual (repair manual). Page 18

Read Sony DPP-SV88 Service Manual online

2-8
DPP-SV88 V1
2-7. Thermal Head
1.
Remove the upper cabinet assembly. (Refer to Section
1-2-1.)
2.
Remove the front panel assembly. (Refer to Section 1-
2-2.)
3.
Remove the CD-RW drive assembly. (Refer to Section
2-1.)
4.
Remove the DK-42 board. (Refer to Section 2-2-3.)
5.
Remove the MD-42 board. (Refer to Section 2-1-3.)
6.
Remove the mechanical deck assembly. (Refer to
Section 2-5.)
7.
Remove the DC fan. (Refer to Section 2-2.)
8.
Pull out the portion A of the connector on the thermal
head in the direction indicated by the arrows, then
disconnect the flexible flat cables.
9.
Remove the two screws, then remove the thermal
head.
10. Remove the center shim placed in between the thermal
head and the heat sink.
11. Attach a thermal head in the reverse order of steps 1 to
10.
Flexible flat cables
Thermal head
Center shim
Connector
Mechanical deck 
assembly
PSW2.6
x
6
A
A
Paper feed frame 
assembly
Chassis assembly
Hooks
Holes
Paper feed frame 
assembly
Pendulum gear
Chassis assembly
Hooks
Holes
Paper feed frame 
assembly
Paper feed 
frame holder
Chassis assembly
BVTT
2.6
x
5
BVTP
2.6
x
8
2-8. Paper Feed Frame Assembly
1.
Remove the upper cabinet assembly. (Refer to Section
1-2-1.)
2.
Remove the front panel assembly. (Refer to Section 1-
2-2.)
3.
Remove the CD-RW drive assembly. (Refer to Section
2-1.)
4.
Remove the DK-42 board. (Refer to Section 2-2-3.)
5.
Remove the MD-42 board. (Refer to Section 2-1-3.)
6.
Remove the mechanical deck assembly. (Refer to
Section 2-5.)
7.
Remove the two screws (BVTT 2.6 
x 5), then remove
the paper feed frame holder from the chassis assembly.
8.
Remove one screw (BVTP 2.6 
x 8), then remove the
paper feed frame assembly from the chassis assembly
in the direction indicated by the arrow.
9.
Attach a paper feed frame assembly in the reverse
order of steps 1 to 8.
Page of 40
Display

Click on the first or last page to see other DPP-SV88 service manuals if exist.