DPP-FP97 - Sony Other Service Manuals Service Manual (repair manual). Page 21

3-9

DPP-FP97

In this unit, “printer status” and “last 10 error status” can be indi-
cated and checked in the service mode.

1.

Start the service mode. (Refer to Section 3-1-1.)

2.

Select “Print Status” using the  DIRECTION buttons (f, F)
and press the [ENTER] button.
“Status indication” screen is displayed. The 1/2 page and the
2/2 page are displayed by using the DIRECTION buttons (f,
F).

3.

After confirming the error indication, quit the service mode.
(Refer to Section 3-1-1.)

Indication in red:

Status indication

**Last Status**:

Status of last printing

**Current Status**:

Current status

**Error 0**:

Status when the last error occurred.

**Error 1**:

Status of error occurred two times earlier.
The last ten errors are stored.

**Error 9**:

Status of error occurred ten times earlier.

**Error 0** is displayed on the initial status screen in the past error
status. To display the earlier error history, press the  DIRECTION
button (G) and to display the later error history, press the DIREC-
TION button (g). The pages can be selected by using the DIREC-
TION buttons (f, F).

When the DIRECTION button (g) is pressed in the **Error 0**
state, **Last Status** is displayed. In the case that no error oc-
curred in the past, **Last Status** is displayed on the initial status
screen. Use the DIRECTION button (g) to display **Current Sta-
tus**.

Ribbon:

Ribbon type

None:

Ribbon is not installed.

Post:

Cartridge for P size is inserted.

L:

Cartridge for L size is inserted.

Cleaning:

Cartridge for cleaning is inserted.

Unknown:

Unknown

Tray:

Tray type

Post:

Tray for P size is inserted.

L:

Tray for L size is inserted.

None;

Tray is not installed.

Card:

King of memory card when making an er-
ror

Error:

Error type

No Error:

No error

No Ribbon:

No ribbon

Ribbon End:

Ribbon end

Ribbon Error:

Ribbon error

Paper End:

No paper

Paper Long:

Paper length error (long)

Paper Short:

Paper length error (short)

Paper Exist:

Paper exists

PE Error:

PE sensor error

Head Error:

Head error

MMotor Error:

DC motor error

SMotor Error:

Stepping motor error

Mode Error:

Mode transition error

HeatStrage Error:

Heat storage correction error

Other Error:

Other error

Unknown:

Unknown

MD Status:

Not used

Pass:

Print pass

Feed:

During paper feeding

Y:

During yellow printing

M:

During magenta printing

C:

During cyan printing

Lami:

During laminated paper printing

Unknown:

Unknown

Total Try:

Total count of tried printing

Total Print:

Total count of printing

HEAD A/D:

Thermistor A/D value of head

SupStep:

Count of paper feed step

Progress:

Progress (%) of each color (Y, M, C, L)
during printing

Sensor:

Each sensor value (1 or 0)
R2
R1
R0
RM
T1
T0
PE
CF_VS

Cool down:

Cool down (Decrease the heat temperature)

Paper Sup:

Paper feed

Paper Rev1:

Paper reverse 1
(Reverse paper to the point of PE paper feed
by determining the paper length.)

Paper Rev2:

Paper reverse 2
(Reverse paper after single color printing)

Paper Init0:

Paper initial point 0

Paper Init1:

Paper initial point 1

Print:

Printing

Paper Eject1:

Paper eject 1
(Paper eject at the completion of printing)

Paper Error Eject0:

Error paper eject 0

Paper Error Eject1:

Error paper eject 1

Timeout M0/1:

Return to M0 or M1

Unknown:

Unknown

Mode Pos:

Head position
PR
RS
PF
PU
RL

Unknown:

Unknown