Read Sony DPP-FP97 Service Manual online
3-6
DPP-FP97
3-3-3. IMAGE READING CHECK FROM
MEMORY CARD
Image reading from Memory Stick or Memory Stick Duo, SD card
or CF card and xD-Picture card can be checked. (If it is JPG, the
image is arbitrary.)
or CF card and xD-Picture card can be checked. (If it is JPG, the
image is arbitrary.)
Preparation:
Place the JPEG file in the root directory of a Memory Stick.
(Filename: MS.jpg)
Place the JPEG file in the root directory of an SD card.
(Filename: SD.jpg) (Use the LOCK OFFed card.)
Place the JPEG file in the root directory of a CF card.
(Filename: CF.jpg)
Place the JPEG file in the root directory of a xD-Picture card.
(Filename: XD.jpg)
Procedure:
1.
Start the service mode. (Refer to Section 3-1-1.)
2.
Select “Card Test” by using the DIRECTION buttons (f, F)
and press the [ENTER] button.
and press the [ENTER] button.
3.
Insert the Memory Stick that is prepared separately, and con-
firm the image of MS.jpg is displayed.
firm the image of MS.jpg is displayed.
4.
Pull out the Memory Stick, and insert the SD card that is pre-
pared separately, and confirm the image of SD.jpg is displayed.
pared separately, and confirm the image of SD.jpg is displayed.
5.
Pull out the SD card, and insert the xD-Picture card that is
prepared separately, and confirm the image of XD.jpg is dis-
played.
prepared separately, and confirm the image of XD.jpg is dis-
played.
6.
Pull out the xD-Picture card, and insert the CF card that is
prepared separately, and confirm the image of CF.jpg is dis-
played.
prepared separately, and confirm the image of CF.jpg is dis-
played.
HDMI Test
Select Model
CEC/Freq Test
USB Test
Card Test
Button Test
OK
- -
A: - - B: - -
????????
????????
- -
CED
When the checks of all buttons are completed without problem, the
initial screen of the service mode is displayed and “OK” is dis-
played to the right of “Button Test”.
initial screen of the service mode is displayed and “OK” is dis-
played to the right of “Button Test”.
3.
Quit the service mode. (Refer to Section 3-1-1.).
LED operation check
Check that the “PRINT LED” and the “Access LED” light up dur-
ing the “Button Test”, and then flash before turning off when the
“Button Test” is completed.
ing the “Button Test”, and then flash before turning off when the
“Button Test” is completed.
Ribbon sensor operation check
Whether the ribbons are correctly recognized or not can be checked.
Check to see that the ribbon type display on the screen agrees with
the inserted ribbon when different types of ribbon are inserted.
Check to see that the ribbon type display on the screen agrees with
the inserted ribbon when different types of ribbon are inserted.
Print Pack Size
Display
P size
Post
L size
L
Not installed
None
Tray sensor operation check
Whether the trays are correctly recognized or not can be checked.
Check to see that the tray type displayed on the screen agrees with
the inserted tray when different types of tray are inserted.
Check to see that the tray type displayed on the screen agrees with
the inserted tray when different types of tray are inserted.
Print Pack Size
Display
P size
Post
L size
L
Not installed
None
Click on the first or last page to see other DPP-FP97 service manuals if exist.