DPP-FP97 - Sony Other Service Manuals Service Manual (repair manual)

dpp-fp97 service manual
Model
DPP-FP97
Pages
23
Size
675.5 KB
Type
PDF
Document
Service Manual
Brand
Device
Other Service Manuals
File
dpp-fp97.pdf
Date

Read Sony DPP-FP97 Service Manual online

Revision History
Revision History
Sony EMCS Co.
DPP-FP97
SERVICE MANUAL
Link
Link
Ver. 1.1  2009.04
2009D0500-1
  © 2009.4
Published by Kohda TEC
9-852-684-12
US Model
Canadian Model
AEP Model
UK Model
East European Model
Russian Model
E Model
Chinese Model
Korea Model
Tourist Model
DIGITAL PHOTO PRINTER
DPP-FP97
SPECIFICATIONS
TROUBLESHOOTING
ADJUSTMENT AND CHECK
REPAIR PARTS LIST
Revised-1
Replacement of the previously issued
SERVICE MANUAL 9-852-684-11
with this manual.
— 2 —
DPP-FP97
SPECIFICATIONS
These specifications are extracted from Operating
Instructions of DPP-FP97 (4-129-103-11 (2)).
 Printer
Printing method
Dye sublimation printing
(Yellow/Magenta/Cyan 3 pass)
Resolution
300 (H) 
× 300 (V) dpi
Image processing per dot
256 levels processing
(8 bits for eachYellow/Magenta/Cyan)
Printing range
1 800 dots 
× 1 200 dots
Printing size
P (4 
× 6 inch) size:
101.6 
× 152.4 mm (maximum, borderless)
Printing time (per sheet)
Memory card/Internal memory
 *1 *2 *3 *4 
: Approx.
45 sec.
PictBridge
 *3 *5 
: Approx. 58 sec.
Via PC
 *6 
: Approx. 45 sec.
Input/Output connectors
HDMI OUT (output) connector
A-TYPE connector,
1 080i (59.94Hz)/1 080i (50Hz)/
576p (50Hz)/480p (59.94Hz) compatible,
“BRAVIA” Sync compatible
USB (Hi-Speed USB) for PC connection
PictBridge/EXT INTERFACE connector
Slot
“Memory Stick” media insertion slot
SD memory Card/xD-Picture Card insertion
dual-format slot
CompactFlash card insertion slot
Compatible image file formats
JPEG: DCF 2.0 compatible, Exif 2.21
  compatible, JFIF*7
TIFF: Exif 2.21 compatible
BMP
 *8 
: 1, 4, 8, 16, 24, 32 bits Windows format
Some image file formats are not compatible.
Maximum number of pixels to be
handled
8 192(H) 
× 6 144(V) dots
(Excluding “Index Print” and part of
  “CreativePrint”)
File system
FAT12/16/32, sector size 2048 bytes or smaller
Image file name
DCF format, 256 characters, 8th or less
hierarchy
Internal memory
Appox. 20MB
The memory capacity shown here was
calculated on the basis that 1MB is 1 million
bytes.
Maximum number of files to be
handled
9 999 files for a memory card/external device
Ink ribbon/Print Paper
Please use a Sony optional color print pack
designed for the printer.
LCD screen
LCD panel:
8.8 cm (3.5 type) TFT drive
Total number of dots:
230 400 (320 RGB 
× 240)
Power requirements
DC IN jack, 
 24 V
Power consumption
While printing: 83 W (maximum)
On standby mode: less than 1W
Operating temperature
°C to 35 °C (41 °F to 95 °F)
Dimensions
Height :Approx. 67 mm (2 
5
/
8
 inches)
Width :Approx. 180 mm (7 
1
/
8
 inches)
Depth :Approx. 137 mm (5 
1
/
2
 
inches)
(excluding a handle)
Approx. 149 mm (5 
7
/
8
 
inches)
(including a handle)
Depth when the paper tray is installed:
Approx. 317 mm (12 
1
/
2
 inches)
Mass
Approx. 1.2 kg (2 lb 10 oz)
(excluding the paper tray, ink ribbon,
  AC adaptor)
Supplied accessories
• Paper tray
• AC adaptor
• AC power cord
 *9
• USB cable
• Cleaning cartridge / Cleaning sheet
• CD-ROM (Windows Printer Driver Software
Ver.1.0 and PMB (Picture Motion Browser)
Ver. 4.2)
• Operating Instructions
• Read This First
• About the Print Packs
• Warranty (In some regions, the warranty is
not supplied.)
• Sony End User Software License Agreement
 AC adaptor AC-S2422
Power requirements
~ 100 V to 240 V, 50/60 Hz, 1.5 A to 0.75 A
Rated output voltage
 24 V 2.2 A (2.2A)
Peak 3.7 A 6.5 s
Operating temperature
°C to 35 °C (41 °F to 95 °F)
Dimensions
Approx. 60 
× 30.5 × 122 mm
(2 
3
/
8
 
× 1 
1
/
4
 
× 4 
7
/
8
 inches)
(w/h/d, excluding protruding parts and cables)
Mass
Approx. 305 g (11 oz)
Design and specifications are subject to change
without notice.
* The total number of sheets of P size print paper
that the printer can print is estimated to be
approximately 2 000. For the total number of
sheets, please check “Printer information
display” of the “Display/Printer setup” menu.
*1: Print Settings: Borderless, Date Print: Off,
Auto Fine Print6: On (Photo) (When
displaying on the LCD screen)
*2: When printing a photo (Approx.4.3 MB file
size) taken by a Sony digital still camera
containing effective picture elements of
approximately 12 100 000 or equivalent, and
then saved in a “Memory Stick” media or
“Internal memory.”
*3: Print Speed: Time from when the PRINT
button is pressed to when printing is finished.
(The printing time may vary depending on a
used equipment, a format of an image, a used
memory card, settings of an application and
operating conditions.)
*4: When printing from a sony “Memory Stick
PRO Duo” media inserted in the printer’s slot
*5: When printing via DSC-W200 connected by
USB cable. Time from when the PRINT button
on the OSD of the camera is pressed to when
the printing is finished.
*6: The time for data processing and transferring
is excluded.
*7: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0
format.
*8: You cannot print using the PMB (Picture
Motion Browser).
*9: The plug shape and specifications of the AC
power cord differ depending on the region in
which you purchased the printer.
— 3 —
DPP-FP97
1.
Check the area of your repair for unsoldered or poorly-sol-
dered connections.  Check the entire board surface for solder
splashes and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly transis-
tors, that were installed during a previous repair.  Point them
out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and recom-
mend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD  FREE  MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY  CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
DPP-FP97
1.  REPAIR  PARTS  LIST
NOTE
NOTE
Link
Link
EXPLODED  VIEWS
EXPLODED  VIEWS
LID UPPER SECTION
LID UPPER SECTION
PRINTER SECTION
PRINTER SECTION
ACCESSORIES
ACCESSORIES
Page of 23
Display

Download Sony DPP-FP97 Service Manual (Repair Manual)

Here you can read online and download Sony DPP-FP97 Service Manual in PDF. DPP-FP97 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DPP-FP97 Other Service Manuals. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.