Read Sony MPK-DVF6 Service Manual online
– 5 –
MPK-DVF6
16
-GB
Preparations (continued)
For DCR-PC109/PC109E/PC108/PC108E/PC107E/PC106E
1
Install the camcorder to the marine pack.
Connect the remote plug and microphone plug.
1 Connect the microphone plug to the
1 Connect the microphone plug to the
MIC jack (plug in power).
2 Connect the remote plug to the LANC
jack.
2
Insert the camcorder until the
mounting shoe clicks into place.
mounting shoe clicks into place.
3
Connect the monitor cord to the jack of
camera mounting shoe G.
camera mounting shoe G.
The cords are placed in the
plug holders of the marine
pack at the factory. Pull the
plugs out of the holders when
in use.
plug holders of the marine
pack at the factory. Pull the
plugs out of the holders when
in use.
front shell
1 to the MIC jack (plug in power)
2 to the LANC
jack
17
-GB
GB
4
Attach the front shell to the rear shell. Hold both
shells firmly and fasten the 3 latches securely.
shells firmly and fasten the 3 latches securely.
Take care not to pinch the remote, microphone, and
monitor cords. If this happens water may leak in.
For details on handling the O-ring, see page 29.
Take care not to pinch the cords.
monitor cords. If this happens water may leak in.
For details on handling the O-ring, see page 29.
Take care not to pinch the cords.
5
Attach the grip.
Fasten the screw tightly.
Now you have finished the preparations.
Be sure to check that the equipment operates correctly and that there is no water
leakage before you dive (see page 20).
Be sure to check that the equipment operates correctly and that there is no water
leakage before you dive (see page 20).
continued
18
-GB
Preparations (continued)
For DCR-TRV900/TRV900E/TRV890E/TRV118E/TRV116E/TRV50/
TRV50E/TRV40/TRV40E/TRV30/TRV30E/TRV27/TRV27E/TRV25/
TRV25E/TRV24E/TRV20/TRV20E/TRV18/TRV18E/TRV17/TRV17E/
TRV16/TRV16E/TRV15/TRV15E/TRV11/TRV11E/TRV10/TRV10E/
TRV9/TRV9E/TRV8/TRV8E/TRV6/TRV6E
TRV50E/TRV40/TRV40E/TRV30/TRV30E/TRV27/TRV27E/TRV25/
TRV25E/TRV24E/TRV20/TRV20E/TRV18/TRV18E/TRV17/TRV17E/
TRV16/TRV16E/TRV15/TRV15E/TRV11/TRV11E/TRV10/TRV10E/
TRV9/TRV9E/TRV8/TRV8E/TRV6/TRV6E
1
Install the camcorder to the marine pack.
Connect the remote plug and the
microphone plug.
1 Connect the microphone plug to
microphone plug.
1 Connect the microphone plug to
the MIC jack (plug in power).
2 Connect the remote plug to the
LANC jack.
2
Insert the camcorder until the
mounting shoe clicks into place.
mounting shoe clicks into place.
3
Connect the monitor cord to the
jack of camera mounting shoe B.
jack of camera mounting shoe B.
front shell
1 to the MIC jack
(plug in power)
2 to the LANC jack
The cords are placed in the
plug holders of the marine
pack at the factory. Pull the
plugs out of the holders when
in use.
plug holders of the marine
pack at the factory. Pull the
plugs out of the holders when
in use.
19
-GB
GB
4
Attach the front shell to the rear shell.
Hold both shells firmly and fasten the 3
latches securely.
Hold both shells firmly and fasten the 3
latches securely.
Take care not to pinch the remote,
microphone, and monitor cords. If this
happens water may leak in.
For details on handling the O-ring, see page
29.
microphone, and monitor cords. If this
happens water may leak in.
For details on handling the O-ring, see page
29.
5
Attach the grip.
Fasten the screw tightly.
Now you have finished the preparations.
Be sure to check that the equipment operates correctly and that there is no water
leakage before you dive (see page 20).
Be sure to check that the equipment operates correctly and that there is no water
leakage before you dive (see page 20).
Click on the first or last page to see other MPK-DVF6 service manuals if exist.