Read Sony MPK-DVF6 Service Manual online
– 3 –
MPK-DVF6
8
-GB
Preparations (continued)
For DCR-TRV30/TRV30E/TRV20/TRV20E/TRV17/TRV17E/TRV15/
TRV15E/TRV11/TRV11E/TRV6/TRV6E
TRV15E/TRV11/TRV11E/TRV6/TRV6E
Use camera mounting shoe B and D, cushions for camera mounting shoe D and the
screw plate.
Before attaching the camcorder
Check the cushions for camera mounting shoe D and the installing position of the
screw plate for your camcorder against the table below.
screw plate.
Before attaching the camcorder
Check the cushions for camera mounting shoe D and the installing position of the
screw plate for your camcorder against the table below.
Camera
Camera
DCR-
mounting mounting
Cushion
shoe B
shoe D
TRV30/TRV30E
2
1
Thick
TRV20/TRV20E
2
1
Thin
TRV17/TRV17E/
2
3
Thin
TRV15/TRV15E
TRV11/TRV11E/
2
2
Thin
TRV6/TRV6E
Remove the stick tape from the
cushion for camera mounting shoe
D. Then stick the cushion for
camera mounting shoe D onto
camera mounting shoe D as shown
in the illustration.
cushion for camera mounting shoe
D. Then stick the cushion for
camera mounting shoe D onto
camera mounting shoe D as shown
in the illustration.
1 Attach the screw plate to the
position on shoe D so that the
catch on the reverse side of the
shoe D clicks into place.
The installing position of the
screw plate differs on your
camcorder. For details, refer to
the table above.
catch on the reverse side of the
shoe D clicks into place.
The installing position of the
screw plate differs on your
camcorder. For details, refer to
the table above.
2 Fasten the screw of the screw
plate on shoe D to the tripod
screw hole of the camcorder and
tighten firmly.
screw hole of the camcorder and
tighten firmly.
3 Attach the screw plate to the
position 2 on shoe B.
4 Fasten the screw of the screw
plate on the shoe B to the screw
hole on the shoe D of the
camcorder tightly.
hole on the shoe D of the
camcorder tightly.
5 Connect the A/V connecting
cable of the shoe to the
camcorder’s AUDIO/VIDEO
jack.
camcorder’s AUDIO/VIDEO
jack.
Installation
position
of the screw plate
of the camera
mounting shoe D
position
of the screw plate
of the camera
mounting shoe D
Camera mounting
shoe D
shoe D
Camera mounting
shoe B
shoe B
Screw plate
Screw plate
9
-GB
GB
For DCR-TRV50/TRV50E/TRV40/TRV40E
Use camera mounting shoe B, E and the screw plate.
1 Attach the screw plate to
1 Attach the screw plate to
position 1 on shoe E so that the
catch on the reverse side of the
shoe clicks into place.
catch on the reverse side of the
shoe clicks into place.
2 Fasten the screw of the screw
plate on shoe E to the tripod
screw hole of the camcorder and
tighten firmly.
screw hole of the camcorder and
tighten firmly.
3 Attach the screw plate to
position 2 on shoe B.
4 Fasten the screw of the screw
plate on the shoe B to the screw
hole on the shoe E of the
camcorder tightly.
hole on the shoe E of the
camcorder tightly.
5 Connect the A/V connecting
cable of the shoe to the
camcorder’s AUDIO/VIDEO
jack.
camcorder’s AUDIO/VIDEO
jack.
Camera mounting
shoe E
shoe E
Camera mounting
shoe B
shoe B
Screw plate
Installation
position
of the screw plate
on the camera
mounting shoe E
position
of the screw plate
on the camera
mounting shoe E
B
continued
10
-GB
Preparations (continued)
For DCR-TRV118E/TRV116E/TRV27/TRV27E/TRV25/TRV25E/
TRV24E/TRV18/TRV18E/TRV16/TRV16E
TRV24E/TRV18/TRV18E/TRV16/TRV16E
Use camera mounting shoe B and E,
spacer C, and the screw plate.
1 Attach the spacer C to shoe E.
spacer C, and the screw plate.
1 Attach the spacer C to shoe E.
Attach the screw plate to
position 2 on shoe E so that the
catch on the reverse side of the
shoe clicks into place.
position 2 on shoe E so that the
catch on the reverse side of the
shoe clicks into place.
2 Fasten the screw of the screw
plate on shoe E to the tripod
screw hole of the camcorder and
tighten firmly.
screw hole of the camcorder and
tighten firmly.
3 Attach the screw plate to
position 2 on shoe B.
4 Fasten the screw of the screw
plate on the shoe B to the screw
hole on the shoe E of the
camcorder tightly.
hole on the shoe E of the
camcorder tightly.
5 Connect the A/V connecting
cable of the shoe to the
camcorder’s AUDIO/VIDEO
jack.
camcorder’s AUDIO/VIDEO
jack.
Installation
position
of the screw plate
on the camera
mounting shoe B
position
of the screw plate
on the camera
mounting shoe B
Now you are ready to install the camcorder to the marine pack.
Be sure to check that the camera mounting shoe is attached to the camcorder
tightly before you install the camcorder to the marine pack.
Be sure to check that the camera mounting shoe is attached to the camcorder
tightly before you install the camcorder to the marine pack.
Camera mounting
shoe B
shoe B
Screw plate
Spacer C
Camera mounting
shoe E
shoe E
Screw plate
3
11
-GB
GB
6
Prepare to record.
1 Set the POWER switch to CAMERA.
2 Set COMMANDER to ON in the menu settings.
3 Cancel the following functions: BACK LIGHT, NIGHTSHOT, PROGRAM AE,
2 Set COMMANDER to ON in the menu settings.
3 Cancel the following functions: BACK LIGHT, NIGHTSHOT, PROGRAM AE,
flash and Picture effect.
4 Set the FOCUS switch to AUTO.
5 Set DISPLAY to V-OUT/LCD in the menu settings and press the DISPLAY
5 Set DISPLAY to V-OUT/LCD in the menu settings and press the DISPLAY
button on your camcorder before installing the marine pack.
*
If your camcorder has REC LAMP in the menu settings, set it to OFF. By using
this function, the light of the lamp is not reflected in the lens. For details, please
refer to the operating instructions supplied with your camcorder.
this function, the light of the lamp is not reflected in the lens. For details, please
refer to the operating instructions supplied with your camcorder.
continued
Click on the first or last page to see other MPK-DVF6 service manuals if exist.