Read Sony MHS-TS22 (serv.man2) Service Manual online
MHS-TS22_ADJ
5-8
Selectable language table
5-3. PRODUCT ID LIST
Destination
Color
Product ID
6_U
BLACK
80700130
6_U
BLUE
80700131
6_U
RED
80700132
DESTINA
TION
SELECTABLE LANGUAGE
English
French
German
Spanish
Italian
Portuguese
Simplified Chinese
T
raditional Chinese
Arabic
Dutch
Russian
Swedish
Korean
Norwegian
Danish
Finnish
Polish
Hungarian
Czech
Persian
Thai
Greek
T
urkish
Malay
Croatian
Romanian
Indonesian
Bulgarian
V
ietnamese
U_6
z
a
a
z
: INITIAL LANGUAGE
5-2-7. Remove Adjustment FW
After checking all above adjustment result, it will remove adjustment FW automatically.
When the file has been successfully deleted, the screen shown in Fig. 5-2-35 appears.
Touching the right key or left key repeatedly in this state returns the screen to the screen shown in Fig. 5-2-27 or Fig. 5-2-29.
Furthermore, touching the Menu key returns the screen to the adjustment mode screen.
When the file has been successfully deleted, the screen shown in Fig. 5-2-35 appears.
Touching the right key or left key repeatedly in this state returns the screen to the screen shown in Fig. 5-2-27 or Fig. 5-2-29.
Furthermore, touching the Menu key returns the screen to the adjustment mode screen.
XXX NG
Error:Adjust FW
can not removed
Error:Adjust FW
can not removed
Fig. 5-2-36
Failed in removing adjustment FW.
If the adjustment FW cannot be
removed automatically, perform
the following procedures to
remove it.
If the adjustment FW cannot be
removed automatically, perform
the following procedures to
remove it.
1)
Turn off the power of the
camera.
camera.
2)
Disconnect the USB cable
from the USB charge adaptor.
from the USB charge adaptor.
3)
Connect the USB cable
disconnected in step 2) to PC.
disconnected in step 2) to PC.
4)
Turn on the power of the
camera.
camera.
5)
Remove the SDW5090.bin
saved in the “START” root
directory.
saved in the “START” root
directory.
Screen display
OOO OK
Adjust FW
have removed
Adjust FW
have removed
Fig. 5-2-35
Succeeded in removing adjust-
ment FW.
ment FW.
Note: If only “Set Language Destination” is executed independently, the “lang.txt” file remains in the BLOGGIE drive.
Make sure that the “lang.txt” file is not remaining to prevent unnecessary files from remaining.