MHS-TS22 (serv.man2) - Sony Movie Service Manual (repair manual). Page 3

MHS-TS22_ADJ

5-3

1)  Download the firmware file “TS22_[][][]ADJ.zip” from the TISS homepage.
 

Uncompress the “TS22_[][][]ADJ.zip”, then confirm that it includes the following item.

• SDW5090.bin

2)  Save the uncompressed file “SDW5090.bin” in the root directory of the slot named “START”.

  Saving it in other directories causes a malfunction of program.

3)  With the camera turned off.

4)  Disconnect the USB cable from PC.

5)  Keep pressing the Power button while pressing the Set key.

6)  Release the Set key about one second later, and then release the Power button.

7)  Start the unit in the adjustment mode several seconds later and check that the screen shown in Fig. 5-1-4 appears.

8)  Connect the equipment to be used by referring to “5-1-4 Connecting the Equipment”.

 

Key Down: AWBBadPixel Adjust
Key Left: BrightPixel Adjust
Key Right: LensShading Adjust
Key Set: Check Result

Key Up: AutoFocus Adjust

MHS-TS22 V3.01ADJ MCUParts ADJ

 

On the screen that appears upon completion of each adjustment, touch the Menu key to return to the initial screen (Fig. 5-1-4).
However, only after the bright pixel adjustment has been completed, turn off the power of the unit.
Turning off the power after the bright pixel adjustment deletes temporary files generated during the AWB bad pixel adjustment from the BLOGGIE drive.