Read Sony HDR-FX1 / HDR-FX1E (serv.man9) Service Manual online
— 5 —
HDR-FX1/FX1E
Added contents
Page 6-11
3-2. 8 Page Table (Mechanism Control Microprocessor
Version 4.0 (MP4))
Note1: The data of page: 0, address: 10 must be “00”.
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
13, 18, 1C Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Table. 6-1-6 (2).
3-3. 8 Page Table (Mechanism Control Microprocessor
Version 5.0 (MP5))
Note1: The data of page: 0, address: 10 must be “00”.
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
13, 18, 1C Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Table. 6-1-6 (3).
Address
00 to 7D
7E
7F to 83
84
85 to FF
Remark
Fixed data-1
Fixed data-2
Fixed data-1
Fixed data-2
Fixed data-1
Address
00 to FF
Remark
Fixed data-1
3-4. 8 Page Table (Mechanism Control Microprocessor
Version 6.0 (MP6) to Version 8.0 (MP8))
Note1: The data of page: 0, address: 10 must be “00”.
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
13, 18, 1C Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Note3: When the mechanism control microprocessor is replaced, check
that the data of the fixed data address shown in the table is the
initial value. If not, change the data to the initial value.
initial value. If not, change the data to the initial value.
Table. 6-1-6 (4).
Address
Remark
Initial value
Address
Remark
Initial value
00 to 84
85
86 to FF
50
Fixed data-1
Fixed data (Note3)
Fixed data-1
Before change
After change
Page 6-11, 6-12
4. C Page Table
Note1: The data of page: 0, address: 10 must be “00”.
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
13, 18, 1C Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Note3: PAL model with the version 1.0 mechanism control
microprocessor, or NTSC model.
Note4: PAL model with the version 2.0 mechanism control
microprocessor. (Refer to “2. Modification of 8, C, 13, 18, 1C
Page Data” for version check of the mechanism control
microprocessor (VC-367 board IC8801).).
Page Data” for version check of the mechanism control
microprocessor (VC-367 board IC8801).).
4. C Page Table
4-1. C Page Table (Mechanism Control Microprocessor
4-1. C Page Table (Mechanism Control Microprocessor
Version 1.0 (MP1))
Note1: The data of page: 0, address: 10 must be “00”.
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
13, 18, 1C Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Initial value
NTSC PAL
25
26
27
85
86
87
88 to F3
S VIDEO out Y level adj. (Note3)
S VIDEO out chroma level adj.
(Note3)
S VIDEO out Y level adj. (Note4)
S VIDEO out chroma level adj.
(Note4)
Fixed data-1
Address
Remark
Initial value
70
2A
2A
70
2A
2A
70
2A
2A
70
2A
2A
Initial value
NTSC PAL
25
26
27
85 to F3
S VIDEO out Y level adj. (NTSC/PAL)
S VIDEO out chroma level adj.
(NTSC/PAL)
Fixed data-1
Address
Remark
Initial value
70
2A
2A
70
2A
2A
Table. 6-1-7.
Table. 6-1-7. (1)
: Changed portion
: Added portion
: Deleted portion
Click on the first or last page to see other HDR-FX1 / HDR-FX1E (serv.man9) service manuals if exist.