Read Sony HDR-FX1 / HDR-FX1E (serv.man9) Service Manual online
— 4 —
HDR-FX1/FX1E
Before change
After change
Page 6-7
Page 6-10
6
. 1A Page Table
Address
D9
DA to D0
DE
Remark
Fixed data-2
Fixed data-1
Fixed data-2
Address
D9
DA to DD
DE
Remark
Fixed data-2
Fixed data-1
Fixed data-2
Table. 6-1-5.
Table. 6-1-5.
1-2-2.
INITIALIZATION OF 8, C, 13, 18, 1C PAGE DATA
2. Modification of 8, C, 13, 18, 1C Page Data
If the 8, C, 13, 18, 1C page data has been initialized, change the
data of the “Fixed data-2” address shown in the following table by
manual input.
If the 8, C, 13, 18, 1C page data has been initialized, change the
data of the “Fixed data-2” address shown in the following table by
manual input.
Version check of the mechanism control microprocessor:
(VC-367 board IC8801)
(VC-367 board IC8801)
Order Page Address Data
Procedure
1
0
10
00
Set the data.
2
3
FF
The data shows the version of the
mechanism control
microprocessor.
10: Ver. 1.0 (MP1)
20: Ver. 2.0 (MP2)
mechanism control
microprocessor.
10: Ver. 1.0 (MP1)
20: Ver. 2.0 (MP2)
Note:
For PAL model, the S VIDEO OUT Y/chroma level adjustment
addresses are changed by the version of the mechanism control
microprocessor. (Refer to “4. C Page Table”.)
addresses are changed by the version of the mechanism control
microprocessor. (Refer to “4. C Page Table”.)
2. Modification of 8, C, 13, 18, 1C Page Data
If the 8, C, 13, 18, 1C page data has been initialized, change the
data of the “Fixed data-2” address shown in the following table
corresponding to the mechanism control microprocessor’s version
by manual input.
If the 8, C, 13, 18, 1C page data has been initialized, change the
data of the “Fixed data-2” address shown in the following table
corresponding to the mechanism control microprocessor’s version
by manual input.
Version check of the mechanism control microprocessor:
(VC-367 board IC8801)
(VC-367 board IC8801)
Order Page Address Data
Procedure
1
0
10
00
Set the data.
2
3
FF
The data shows the version of the
mechanism control
microprocessor.
10: Ver. 1.0 (MP1)
20: Ver. 2.0 (MP2)
30: Ver. 3.0 (MP3)
40: Ver. 4.0 (MP4)
50: Ver. 5.0 (MP5)
60: Ver. 6.0 (MP6)
70: Ver. 7.0 (MP7)
80: Ver. 8.0 (MP8)
mechanism control
microprocessor.
10: Ver. 1.0 (MP1)
20: Ver. 2.0 (MP2)
30: Ver. 3.0 (MP3)
40: Ver. 4.0 (MP4)
50: Ver. 5.0 (MP5)
60: Ver. 6.0 (MP6)
70: Ver. 7.0 (MP7)
80: Ver. 8.0 (MP8)
Note: For PAL model, the S VIDEO out Y/chroma level adjustment
addresses are changed by the version of the mechanism control
microprocessor. (Refer to “4. C Page Table”.)
microprocessor. (Refer to “4. C Page Table”.)
Page 6-11
3. 8 Page Table
Note1: The data of page: 0, address: 10 must be “00”.
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
13, 18, 1C Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Address
00 to 7D
D4 to FF
Remark
Fixed data-1
Fixed data-1
Table. 6-1-6.
3. 8 Page Table
3-1. 8 Page Table (Mechanism Control Microprocessor
3-1. 8 Page Table (Mechanism Control Microprocessor
Version 1.0 (MP1) to Version 3.0 (MP3))
Note1: The data of page: 0, address: 10 must be “00”.
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
Note2: Fixed data-1: Initialized data. (Refer to “1. Initializing the 8, C,
13, 18, 1C Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Fixed data-2: Modified data. (Refer to “2. Modification of 8, C,
13, 18, 1C Page Data”).
Address
00 to 7D
D4 to FF
Remark
Fixed data-1
Fixed data-1
Table. 6-1-6 (1).
: Changed portion
: Added portion
Click on the first or last page to see other HDR-FX1 / HDR-FX1E (serv.man9) service manuals if exist.