Read Sony HDR-CX720V / HDR-CX730E / HDR-CX740E / HDR-CX740VE / HDR-CX760E / HDR-CX760V / HDR-PJ710 / HDR-PJ710V / HDR-PJ710VE / HDR-PJ720E / HDR-PJ740VE / HDR-PJ760 / HDR-PJ760E / HDR-PJ760V / HDR-PJ760VE (serv.man4) Service Manual online
– 3 –
HDR-CX720V/CX730E/CX740E/CX740VE/CX760E/CX760V/PJ710/PJ710V/PJ710VE/PJ720E/PJ740VE/PJ760/PJ760E/PJ760V/PJ760VE_L2
Screw
Screw
Screw
Screw
Screw
Screw
Plate of the Motor A
(9) Remove the three screws while turning the Plate of the
Motor A to detach the Motor A.
Motor A
TO
P
FRONT
Screw
Polyimide Sheet
Polyimide Sheet
Screw
Screw
Screw
CM Radiation Sheet
LF-153 Flexible Board
(10) Peel off the Adhesive Part of the LF-153 Flexible Board
and disconnect the connector to remove the LF-153 Flexible
Board.
Board.
(11) Peel off the CM Radiation Sheet and peel off the
Adhesive Parts of the LF-148 Flexible Board.
(12) Peel off the two Polyimide Sheets and remove the
four screws.
Adhesive Part
Connector
Adhesive Parts
LF-148 Flexible
Board
Board
TO
P
TO
P
TO
P
FRONT
FRONT
FRONT
Screw
Screw
Boss
Boss
Boss
Bosses
Connector
(13)
(14)
Remove the screw and remove the five bosses and disconnect
the connector to detach the Sheet Metal (D-Sub) and the
LF-148 Flexible Board.
the connector to detach the Sheet Metal (D-Sub) and the
LF-148 Flexible Board.
Remove the bond.
(15) Remove the screw to detach the Sheet Metal (A).
Bond
LF-148 Flexible Board,
Sheet Metal (D-Sub)
Sheet Metal (D-Sub)
Sheet Metal (A)
TO
P
FRONT
TO
P
FRO
NT
TO
P
FR
ONT
Front Ornament
Boss
Claw
(16) Remove the boss and the claw to detach the
Front Ornament.
TO
P
FRONT
– ENGLISH –
Click on the first or last page to see other HDR-CX720V / HDR-CX730E / HDR-CX740E / HDR-CX740VE / HDR-CX760E / HDR-CX760V / HDR-PJ710 / HDR-PJ710V / HDR-PJ710VE / HDR-PJ720E / HDR-PJ740VE / HDR-PJ760 / HDR-PJ760E / HDR-PJ760V / HDR-PJ760VE (serv.man4) service manuals if exist.