Read Sony HDR-CX720V / HDR-CX730E / HDR-CX740E / HDR-CX740VE / HDR-CX760E / HDR-CX760V / HDR-PJ710 / HDR-PJ710V / HDR-PJ710VE / HDR-PJ720E / HDR-PJ740VE / HDR-PJ760 / HDR-PJ760E / HDR-PJ760V / HDR-PJ760VE (serv.man4) Service Manual online
– 2 –
HDR-CX720V/CX730E/CX740E/CX740VE/CX760E/CX760V/PJ710/PJ710V/PJ710VE/PJ720E/PJ740VE/PJ760/PJ760E/PJ760V/PJ760VE_L2
SERVICE NOTE
FRONT ORNAMENT REPLACING METHOD
Lens Cap
A protective Lens Cap is attached to each new
service Lens Block.
Carry out replacement work with this Lens Cap
attached.
service Lens Block.
Carry out replacement work with this Lens Cap
attached.
Note:
Removal
Adhesive Parts
Adhesive Part
Connectors
Flexible Board
of the Motor A
of the Motor A
LF-148 Flexible Board
(1) Disconnect the two connectors and peel off the Adhesive
Parts of the Flexible Board of the Motor A and LF-148 Flexible
Board.
Board.
TO
P
FRON
T
Adhesive Part
Screw
Screw
Screw
Screw
Screw
Screw
Sheet Metal (C),
Edge of Mechanical Rubber
Edge of Mechanical Rubber
Bosses
Bosses
LF-153 Flexible Board
(2) Remove the six screws and remove the Sheet Metal (C),
Edge of Mechanical Rubber while detaching the four bosses.
(3) Peel off the Adhesive Parts of the LF-153 Flexible Board.
TO
P
TO
P
FRONT
FRO
NT
Screw
Screw
Screw
Screw
Screw
Plate of the
Motor B
Motor B
Screws
Frame (F-Sub-A),
Frame (F-Sub-B),
Ball Bearing
Frame (F-Sub-B),
Ball Bearing
Motor B
Shaft
Bosses
(4) Remove the two screws and remove the Frame (F-Sub-A),
Frame (F-Sub-B), and Ball Bearing while detaching the two
bosses and the shaft.
bosses and the shaft.
(5) Remove the screw and turn the Plate of the Motor B to remove
the two screws to detach the Motor B.
TO
P
FRONT
TO
P
FRONT
Screw
Screw
Screw
Screw
Screw
Screw
Screw
Sheet Metal (B),
Edge of Mechanical Rubber
Edge of Mechanical Rubber
Frame (E-Sub-A),
Frame (E-Sub-B),
Ball Bearing
Frame (E-Sub-B),
Ball Bearing
Adhesive Part
Flexible Board
of the Motor A
of the Motor A
Shaft
Bosses
Bosses
(7) Peel off the Adhesive Part of the Flexible Board of Motor A.
(6) Remove the four screws and remove the Frame (E-Sub-A),
Frame (E-Sub-B), and Ball Bearing while detaching the
four bosses and the shaft.
four bosses and the shaft.
(8) Remove the three screws to detach the Sheet Metal (B),
Edge of Mechanical Rubber.
TO
P
TO
P
TO
P
FR
ONT
FR
ONT
FRONT
– ENGLISH –
Click on the first or last page to see other HDR-CX720V / HDR-CX730E / HDR-CX740E / HDR-CX740VE / HDR-CX760E / HDR-CX760V / HDR-PJ710 / HDR-PJ710V / HDR-PJ710VE / HDR-PJ720E / HDR-PJ740VE / HDR-PJ760 / HDR-PJ760E / HDR-PJ760V / HDR-PJ760VE (serv.man4) service manuals if exist.