Read Sony HDR-CX720V / HDR-CX730E / HDR-CX740E / HDR-CX740VE / HDR-CX760E / HDR-CX760V / HDR-PJ710 / HDR-PJ710V / HDR-PJ710VE / HDR-PJ720E / HDR-PJ740VE / HDR-PJ760 / HDR-PJ760E / HDR-PJ760V / HDR-PJ760VE (serv.man4) Service Manual online
– 6 –
HDR-CX720V/CX730E/CX740E/CX740VE/CX760E/CX760V/PJ710/PJ710V/PJ710VE/PJ720E/PJ740VE/PJ760/PJ760E/PJ760V/PJ760VE_L2
1
5
6
1
2
3
4
2
Screw
Screw
Frame (F-Sub-A),
Frame (F-Sub-B),
Ball Bearing
Frame (F-Sub-B),
Ball Bearing
Shaft
Hole
LF-153
Flexible
Board
Flexible
Board
Bosses
(13)
(14)
While attaching the two bosses and the shaft and passing the
LF-153 Flexible Board through the hole, install the Frame
(F-Sub-A), Frame (F-Sub-B), and Ball Bearing, and then tighten
two screws in the order shown in the figure below.
LF-153 Flexible Board through the hole, install the Frame
(F-Sub-A), Frame (F-Sub-B), and Ball Bearing, and then tighten
two screws in the order shown in the figure below.
Tightening torque = 0.18 ± 0.01N · m (1.8 ± 0.1kg f · cm)
Adhesive Part
LF-153 Flexible Board
LF-153 Flexible Board
While positioning the Adhesive Parts of the LF-153 Flexible Board
with he two bosses, stick the Adhesive Part.
with he two bosses, stick the Adhesive Part.
Bosses
Screw
Screw
Screw
Screw
Screw
Screw
Bosses
Bosses
(15) While attaching the four bosses, install the Sheet Metal (C) ,
Edge of Mechanical Rubber and then tighten six screws in the
order shown in the figure below.
order shown in the figure below.
Tightening torque = 0.18 ± 0.01N · m (1.8 ± 0.1kg f · cm)
Sheet Metal (C),
Edge of Mechanical Rubber
Edge of Mechanical Rubber
TO
P
TO
P
FR
ONT
FRONT
Adhesive
Sheet
Sheet
Shape and sticking position
of Adhesive Sheet
of Adhesive Sheet
Sheet Metal (C)
Adhesive Part
LF-148 Flexible Board
Redundant part of LF-148
Flexible Board
Flexible Board
Sheet Metal (C)
LF-148 Flexible Board
(16) Stick the LF-148 Flexible Board to the Sheet Metal (C).
If the adhesive force is lowered, cut the Adhesive Sheet
as shown in the figure in the frame and then stick it.
Put the redundant part of the LF-148 Flexible Board
inside the Sheet Metal (C).
as shown in the figure in the frame and then stick it.
Put the redundant part of the LF-148 Flexible Board
inside the Sheet Metal (C).
Adhesive
Sheets
Sheets
TO
P
FRONT
Shape and sticking position
of Adhesive Sheet
of Adhesive Sheet
Handling redundant part of
LF-148 Flexible Board
LF-148 Flexible Board
Sheet Metal (C)
Adhesive
Parts
Parts
Connectors
Flexible Board
of the Motor A
of the Motor A
Flexible Board
of the Motor A
of the Motor A
Flexible Board
of the Motor A
of the Motor A
(17) Stick the Flexible Board of the Motor A to the Sheet Metal (C)
and connect the two connectors.
If the adhesive force is lowered, cut the Adhesive Sheet as
shown in the figure in the frame and then stick it.
shown in the figure in the frame and then stick it.
Adhesive
Sheets
Sheets
Stick the Flexible Board of the Motor A from the center of
the Flexible Board to its both ends.
the Flexible Board to its both ends.
TO
P
FRONT
Shape and sticking position of
Adhesive Sheet
Adhesive Sheet
Flexible Board sticking direction
– ENGLISH –
Click on the first or last page to see other HDR-CX720V / HDR-CX730E / HDR-CX740E / HDR-CX740VE / HDR-CX760E / HDR-CX760V / HDR-PJ710 / HDR-PJ710V / HDR-PJ710VE / HDR-PJ720E / HDR-PJ740VE / HDR-PJ760 / HDR-PJ760E / HDR-PJ760V / HDR-PJ760VE (serv.man4) service manuals if exist.