Read Sony HDR-CX400E / HDR-CX410VE / HDR-CX430V / HDR-CX430VE / HDR-CX510E / HDR-PJ420E / HDR-PJ420VE / HDR-PJ430 / HDR-PJ430E / HDR-PJ430V / HDR-PJ430VE / HDR-PJ510E (serv.man2) Service Manual online
1-6
HDR-CX400E/CX410VE/CX430V/CX430VE/CX510E/PJ420E/PJ420VE/PJ430/PJ430E/PJ430V/PJ430VE/PJ510E_L2
1-5-3.E : 62 : 12 [Shift Lens Overheating (Yaw)] Occurred
Order
AdjustBlock
AdjustCode
Order
1
Start the Adjust Manual in the Adjust Station and execute the [Measure to E:62:11/12] on the [SER-
VICE] tab.
VICE] tab.
2
Check if the shift lens moves while setting the order 1.
If the shift lens does not move, replace the lens block (Note).
When the shift lens moved, proceed to the order 3.
If the shift lens does not move, replace the lens block (Note).
When the shift lens moved, proceed to the order 3.
3
While setting the order 1, measure with an oscilloscope the output voltage of C5636 and C5640 in the
periphery of IC5601 on the VC-1012 board to check the output voltage varies.
periphery of IC5601 on the VC-1012 board to check the output voltage varies.
4
If the output voltage does not vary, replace the lens block (Note).
When the output voltage varied, proceed to the order 5.
When the output voltage varied, proceed to the order 5.
5
Turn the power OFF.
6
While measuring with an oscilloscope the output voltage of R5632 in the periphery
of IC5601 on the VC-1012 board, turn the power ON to check that the output voltage
immediately after the power on change as shown in Fig. 2.
of IC5601 on the VC-1012 board, turn the power ON to check that the output voltage
immediately after the power on change as shown in Fig. 2.
7
If the output voltage rises to 3V, replace the lens block (Note).
If it does not rises to 3V, inspect the camera control circuit IC1301 and IC5601 on the VC-1012 board
periphery.
If it does not rises to 3V, inspect the camera control circuit IC1301 and IC5601 on the VC-1012 board
periphery.
Note: When the lens block was replaced, start the Adjust Manual in the Adjust Station and execute the necessary adjustment items.
After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in the handheld operation.
1-5-4. E : 62 : 20 [Abnormality of Thermistor] Occurred
Order
Procedure
1
Turn the power ON.
2
Confirm the connections of flexible flat cables and connectors between the lens block and VC-1012 board.
3
In case of no malfunction of connections, replace the lens block with new one (Note) . When the error has occurred in spite of the lens
replacement, replace VC-1012 board with new one.
replacement, replace VC-1012 board with new one.
Note: When the lens block was replaced, start the Adjust Manual in the Adjust Station and execute the necessary adjustment items.
After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in the handheld operation.
– ENGLISH –
1-6. GPS RECEIVING CHECK (CX410VE/CX430V/CX430VE/PJ420VE/PJ430V/PJ430VE)
After a part of the set was replaced or after the set was assembled, check the reception of GPS signal.
How to check the GPS function
Bring your camcorder to an open area, and set the GPS to ON (
appears on the LCD screen). Your camcorder starts trying to triangulate. When
your camcorder triangulates successfully, it will record the location information at the time movies and photos were recorded.
• The indicator changes according to the strength of GPS signal reception.
• It may take a while before the camcorder starts triangulating.
To return the display of the unit to “A message appears asking you to confirm whether you agree with the terms of the license agreement of the map
data,” make settings according to the instructions on the SERVICE tab in the Adjustment Manual.
data,” make settings according to the instructions on the SERVICE tab in the Adjustment Manual.
Use GPS Assist Data
If you import GPS Assist Data from your computer to your camcorder using the supplied software “PlayMemories Home,” the time it takes the cam-
corder to acquire your location information can be shortened.
Connect the camcorder to a computer that is connected to the Internet. The GPS Assist Data will be updated automatically.
corder to acquire your location information can be shortened.
Connect the camcorder to a computer that is connected to the Internet. The GPS Assist Data will be updated automatically.
1-7. PRECAUTION ON REPLACING THE MM-102 BOARD (CX410VE/CX430V/CX430VE/
CX510E/PJ420E/PJ420VE/PJ430/PJ430E/PJ430V/PJ430VE/PJ510E)
Do not factory check MM-102 board (GPS Model) in which Map Data is installed.
The Map data is erased when the factory check is done.
The Map data is erased when the factory check is done.
Click on the first or last page to see other HDR-CX400E / HDR-CX410VE / HDR-CX430V / HDR-CX430VE / HDR-CX510E / HDR-PJ420E / HDR-PJ420VE / HDR-PJ430 / HDR-PJ430E / HDR-PJ430V / HDR-PJ430VE / HDR-PJ510E (serv.man2) service manuals if exist.