Read Sony DVP-NS900V Service Manual online
1-4
18
When connecting to a TV that accepts progressive (480p) format signals
You need to use the COMPONENT VIDEO OUT jacks to view progressive signals. Hook up
your TV using pattern
your TV using pattern
C on page 20, and then run Quick Setup on page 31.
If your TV has an S-LINK (control S) input jack
You can control the player from a Sony TV, or control a Sony TV using the player. For instance,
when you play a DVD, the TV’s input will automatically switch to the jack to which you
connected the player.
Connect the TV via the S-LINK/CONTROL S IN jack using an S-LINK cord (not supplied).
Refer to the instructions supplied with the TV.
when you play a DVD, the TV’s input will automatically switch to the jack to which you
connected the player.
Connect the TV via the S-LINK/CONTROL S IN jack using an S-LINK cord (not supplied).
Refer to the instructions supplied with the TV.
Ge
tti
ng S
tti
ng S
ta
rte
d
19
Step 4: Playing a Disc
1
Turn on the TV.
2
Switch the input selector on the TV to the player.
3
Press POWER on the player.
4
Press
A on the player to open the disc tray.
5
Place the disc on the tray with the playback side facing down.
6
Press
H.
The disc tray closes and the player begins playing the disc.
After Step 6
Depending on the disc, a menu may be displayed on the TV screen. If so, select the item you want
from the menu and play the DVD VIDEO (page 40) or VIDEO CD disc (page 42).
from the menu and play the DVD VIDEO (page 40) or VIDEO CD disc (page 42).
To stop playing
Press
x.
To take out the disc
Press
A.
To turn off the player
Press
[
/
1 on the remote. The player is set to standby mode and the power indicator lights up in
red. Press POWER on the player to turn off completely.
With the playback side facing down
20
Hookups
Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 16).
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 16).
Notes
•
Plug cords securely to prevent unwanted noise.
•
Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns
Select one of the patterns
A through C, according to the input jack on your TV monitor, projector,
or AV amplifier (receiver). In order to view progressive signal (480p) pictures with a compatible
TV, projector, or monitor, you must use connection
TV, projector, or monitor, you must use connection
C.
Hookups
21
INPUT
S VIDEO
B
P
R
P
B
Y
COMPONENT
VIDEO IN
C
VIDEO
L
AUDIO
R
INPUT
A
SACD/DVD player
l
: Signal flow
S VIDEO cord
(supplied)
(supplied)
Audio/video cord
(supplied)
(supplied)
(yellow)
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
(green)
(blue)
(red)
Component video cord
(not supplied)
(not supplied)
(green)
(blue)
(red)
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
(yellow)
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
continued
Click on the first or last page to see other DVP-NS900V service manuals if exist.