Read Sony DVP-NS900V Service Manual online
1-8
34
qf
Press X/x to select the item.
Choose the item that matches the audio connection you selected in pages 25 to 29 (
through ).
qg
Press ENTER.
•
When “DIGITAL OUTPUT” is selected in Step qa, Quick Setup is finished. All
connections and setup operations are complete.
connections and setup operations are complete.
•
When “DIGITAL & 5.1CH OUTPUT” is selected in Step qa, the Setup Display for
“
“
SPEAKER SETUP” appears.
qh
Press X/x to select the size of the center speaker.
If no center speaker is connected, select “NONE.” Refer to page 91 for each selection item.
qj
Press ENTER.
The Setup Display for selecting the size of the rear speaker appears.
qk
Press X/x to select the size.
If no rear speaker is connected, select “NONE.”
“
“
SIDE” and “REAR” refer to the speakers’ position relative to your listening position.
Refer to page 91 for each selection item.
Audio Cord Connection Type
You select
Page
D-PCM
89
DTS (only if the amplifier
(receiver) has a DTS decoder)
(receiver) has a DTS decoder)
89
B
D
C-2
D-2
B-2
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
SMALL
LARGE
NONE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
To set press
then
ENTER
NONE
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
NONE
LARGE(REAR)
NONE
LARGE
Hookups
35
ql
Press ENTER.
The Setup Display for selecting whether or not you have connected a subwoofer appears.
w;
Press X/x to select the item.
wa
Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 80).
To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 80).
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 25 to 29
(
items must be set as described below for the audio connection you selected in pages 25 to 29
(
through
). Each of these are the default settings and do not need to be adjusted when
you first connect the player. Refer to page 80 for using the Setup Display.
Audio Connection (pages 25 to 29)
No additional settings are needed.
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 88).
•
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that
conforms to 96 kHz digital audio input (page 89).
conforms to 96 kHz digital audio input (page 89).
Enjoying the surround sound effects
Item
You select
Page
DISTANCE
BALANCE
LEVEL
BALANCE
LEVEL
Set according to the connected
speakers
speakers
91
Item
You select
Page
DOWNMIX
DOLBY SURROUND
88
DIGITAL OUT
ON
88
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
To set, press , then .
To quit press
To quit press
ENTER
ENTER
SETUP
DISPLAY
DISPLAY
NONE
NONE
YES
LARGE(REAR)
B
D
A
B-1
B-2
C-2
D-2
continued
36
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 88).
Item
You select
Page
DOWNMIX
DOLBY SURROUND
88
C-1
D-1
P
lay
ing Disc
ing Disc
s
37
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1
Turn on your TV.
2
Switch the input selector on the TV
to the player.
to the player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel.
select the appropriate channel.
3
Press POWER on the player.
The player enters standby mode and the
power indicator lights up in red.
power indicator lights up in red.
4
Press
A on the player, and place a
disc on the disc tray.
The player automatically turns on and
the power indicator lights up in green.
the power indicator lights up in green.
5
Press
H.
The disc tray closes, and the player
starts playback (continuous play).
Adjust the volume on the TV or the
amplifier (receiver).
starts playback (continuous play).
Adjust the volume on the TV or the
amplifier (receiver).
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions on
the menu. DVD VIDEO (page 40), VIDEO
CD (page 42).
on the TV screen. You can play the disc
interactively by following the instructions on
the menu. DVD VIDEO (page 40), VIDEO
CD (page 42).
To turn on the player
Press POWER on the player. The player
enters standby mode and the power indicator
lights up in red. Press
enters standby mode and the power indicator
lights up in red. Press
[/1 on the remote. The
player turns on and the power indicator lights
up in green. In standby mode, the player also
turns on by pressing
up in green. In standby mode, the player also
turns on by pressing
A on the player or by
pressing
H.
To turn off the player
Press
[/1 on the remote. The player enters
standby mode and the power indicator lights
up in red. To turn off the player completely,
press POWER on the player. While playing a
disc, do not turn off the player by pressing
POWER. Doing so may cancel the menu
settings. When you turn off the player, first
press
up in red. To turn off the player completely,
press POWER on the player. While playing a
disc, do not turn off the player by pressing
POWER. Doing so may cancel the menu
settings. When you turn off the player, first
press
x to stop playback and then press [/1
on the remote.
VIDEO
ON/OFF
ON/OFF
POWER
A
H
Power indicator
[
/
1
H
x
x
VIDEO OFF
PHONES LEVEL control
PHONES jack
With the playback side facing down
continued
Click on the first or last page to see other DVP-NS900V service manuals if exist.