Read Sony DVP-NS900V Service Manual online
– 6 –
2.
DISC REMOVAL PROCEDURE
(at POWER OFF)
(at POWER OFF)
1) Insert a tapering driver into the aperture of the unit bottom,
and move the lever of chuck cam in the direction of the arrow
A
A
. (See Fig. 1)
2) Draw out the tray in the direction of the arrow B, and remove
a disc. (See Fig. 1)
Fig. 1
Tray
Lever of chuck cam
Aperture
B
A
3.
HOW TO SERVICE MB-101 BOARD
1) Remove the top case from the set. (Refer to 2-1)
2) Remove the MB-101 board as shown in Fig. 2.
2) Remove the MB-101 board as shown in Fig. 2.
4) Set the MB-101 board as shown in Fig. 4.
3) Set the service jig (two flexible flat cables) (J-6090-109-A) as
shown in Fig. 3.
Fig. 2
Fig. 3
Fig. 4
1
Flexible flat cable
(FMA-003/FMA-004)
(CN601)
(FMA-003/FMA-004)
(CN601)
1
Flexible flat cable
(FIM-001/FIM-002)
(CN101)
(FIM-001/FIM-002)
(CN101)
2
Connector
(CN101)
(CN101)
3
Two screws (B3)
3
Two screws
(B3)
(B3)
4
Harness
5
MB-101 board
2
Connector
(CN407)
(CN407)
1
Flexible flat cable
(27pin) (CN601)
(27pin) (CN601)
4
Connector
(CN407)
(CN407)
2
Connector
(CN101)
(CN101)
MB-101 board
3
Flexible flat cable
(8pin) (CN407)
(8pin) (CN407)
MB-101 board
Click on the first or last page to see other DVP-NS900V service manuals if exist.