DVP-NS900V - Sony DVD Service Manual (repair manual). Page 12

z

To enhance the surround sound effects:

•

Use high-performance speakers.

•

Use front, rear, and center speakers having the same size and performance.

•

Place a subwoofer between the right and left front speakers.

Front (R)

Front (L)

Rear

(R)

 AV amplifier (receiver) having 

5.1ch inputs or/and a decoder

Subwoofer

Center

Coaxial digital cord 
(not supplied)

Monaural audio cord 
(not supplied)

Stereo audio cord 
(not supplied)

Optical digital cord 
(not supplied) 
Remove jack cap 
before connecting

[Speakers]

SACD/DVD player

l

: Signal flow

[Speakers]

Rear

(L)

to audio input

to coaxial or optical digital input

or

or

This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for 
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use 

. If the 

amplifier (receiver) has a digital input jack, use 

. When connecting to an MD deck or a DAT 

deck, use 

. In this case, you can also connect the player directly to the MD deck or DAT 

deck without using your stereo amplifier (receiver).
xRecommended surround sound effects for the 

•

TVS STANDARD (page 60)

z

In connection

 

, you can use the supplied audio/video cord instead of using a separate audio cord.

z

To realize better surround sound effects, make sure that your listening position is in between your speakers.

SACD audio signals are not output from the digital jack.

SACD/DVD player

or

Stereo amplifier (receiver)

MD deck/DAT deck

Front 

(L)

Front 

(R)

[Speakers]

(white)

(red)

(red)

(white)

Coaxial digital cord 
(not supplied)

Stereo audio cord 
(not supplied)

to audio input

to coaxial or optical digital input

Optical digital cord 
(not supplied)
Remove jack cap 
before connecting

or

l

: Signal flow

This connection will allow you to enjoy the surround effects of the Dolby Surround (Pro Logic) 
decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a 
Dolby Digital or DTS decoder, refer to page 25.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
This connection needs a minimum of 3 speakers (front L and R, and rear (monaural)). The 
surround effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) 
are used.
If your amplifier (receiver) has L and R audio input jacks only, use 

. If your amplifier 

(receiver) has a digital input jack, use 

.

xRecommended surround sound effects using this connection with your 
amplifier (receiver)

•

Dolby Surround (Pro Logic) (page 97)

z

For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).

SACD audio signals are not output from the digital jack.