Read Sony SAL70200G2 Service Manual online
5-15
SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)
(4) Lens adjustment program
1) Start up the lens adjustment program (ACSSM-S-VerX.XX.exe).
2) Click [Setup] and perform the initial setting. (Refer to 5-7-3. Initial Setting of Lens Adjustment Program (ActuatorCheckerSSM) .)
1) Start up the lens adjustment program (ACSSM-S-VerX.XX.exe).
2) Click [Setup] and perform the initial setting. (Refer to 5-7-3. Initial Setting of Lens Adjustment Program (ActuatorCheckerSSM) .)
Note:
When the Multi Serial window opens, take the following actions.
Process No.: You need not enter process number.
Serial No.: When the mount block assy is replaced, enter a serial number.
Fig.
5-8-7
2. Adjustment/Inspection procedure
1) Click [Start[Ent]] on the main screen.
1) Click [Start[Ent]] on the main screen.
Fig.
5-8-8
2) Carry out operations below following instructions on windows.
3. Adjustment/Inspection Item
1) Adjust Focus Brush
2) DMF Rotation Detect
3) Focus Pattern (Motor)
4) Adjust & Check MR
5) Adjust Driving Frequency & Gain
6) Focus Load FB
1) Adjust Focus Brush
2) DMF Rotation Detect
3) Focus Pattern (Motor)
4) Adjust & Check MR
5) Adjust Driving Frequency & Gain
6) Focus Load FB
7) MR WavesCheck (Manual)
8) Check
8) Check
Sounds
9) Search
Zoom-Adj
10) Search Focus-Adj
Note:
Four items of 7 to 10 are not executed automatically if click the [Start[Ent]].
5-8-1. Focus Brush (A Encoder Brush) Position Adjustment
Equipment
• Adhesive bond (B-10)
• Adhesive bond (B-10)
1. Preparation
1) Disassemble the lens unit to the state shown in Fig. 5-8-9.
1) Disassemble the lens unit to the state shown in Fig. 5-8-9.
Focus Brush
(A Encoder Brush)
(A Encoder Brush)
Fig.
5-8-9
Click on the first or last page to see other SAL70200G2 service manuals if exist.