SAL70200G2 - Sony Digital Camera Service Manual (repair manual). Page 47

5-13

SAL70200G2 (2.8/70-200 G SSM Ⅱ) (70-200mm F2.8 G SSM II)

2.  Startup of Lens Adjustment Program (ActuatorCheckerSSM)
1)  Turn on the personal computer and the finished inspection JIG II.
2) Start up ACSSM-S-VerXXX.exe  from an arbitrary folder.

Note:
•  At the first time using, the followings appear on the screen (Fig. 5-7-2).

It is required to ask HQ about the password for the Com/User Characteristic Number and the manufacturer/type name of the personal 
computer.
Ex.  Com/User Characteristic Number :  iYdDZfq9q
 

Personal Computer : 

SONY PCV-RZ33P

•  It is no need to input password to the computer once registered.

(The screen requires password does not appear.)

•  If the personal computer or the finished inspection JIG II is changed, the password and the Com/User Characteristic Number are 

changed. Therefore on the startup, the password input is required again.

3) Input the password and click [OK [Ent]], the following appears on the screen (Fig. 5-7-3).

1.  Start up the lens adjustment program (ACSSM-S-VerX.XX.exe).

 

2.  When the Japanese window appears, click the [Setup] button, change the language to English.

Depending on the initial startup or setting made at the previous startup, the window differs.

3.  Set the following contents in the SETUP window.

MODEL 

Model to be adjustment in this time

Language English

State 

Final or Half

4.  Confirm that all of the items are set, and click [Save].

 

5.  Click the [Finish] to close the SETUP window.

The inspection method has the method of executing the method of inspecting the corresponding model as everything continues and the 
inspection of each item one by one.
Click [START] from the start up window when you inspect the corresponding model as everything continues.
Click the inspection of each item from the start up window, when you inspect one by one.