Read Sony SAL30M28 Service Manual online
SAL30M28 (DT 2.8/30 MACRO SAM) (DT 30mm F2.8 Macro SAM)
2-7
HELP12
Grease (G-36): J-6082-667-A
1. Apply the grease (G-36) to the front group (rear) group assy.
Front Group
(Rear) Group Assy
(Rear) Group Assy
Front Group
(Rear) Group Assy
(Rear) Group Assy
Apply the grease (G-36)
Apply the grease (G-36)
Apply the grease (G-36)
Apply the grease (G-36)
HELP13
Grease (G-36): J-6082-667-A
1. Apply the grease (G-36) to the indicated portions of helicoid male and helicoid female.
Apply the grease (G-36)
Apply the grease (G-36)
Apply the grease (G-36)
Focus Ring Assy
(Cross section)
(Cross section)
Helicoid Female
(Cross section)
(Cross section)
Helicoid Male
2. Set the focus ring assy to the infinity (
∞
) end.
3. Assemble the helicoid male into the helicoid female with rotating counterclockwise the helicoid male.
Note 1:
Insert the helicoid male into the helicoid female so that aligning the index pin of middle lens barrel assy with the in-
scription (PC) on the helicoid male.
Note 2:
Rotate clockwise the helicoid male until it clicks and engage the helicoid female with the helicoid male.
Note 3:
When assembling counterclockwise the helicoid male as far as it goes, confirm that the round concave of helicoid male
and the vertical groove of focus ring assy locate as shown in the illustration.
Note 2
Note 3
Middle Lens
Barrel Assy
Barrel Assy
Helicoid Male
Helicoid Male
Inscription
(PC)
(PC)
Focus Ring Assy
Helicoid Female
Helicoid Female
Index pin
Vertical groove of Focus Ring Assy
Round concave of Helicoid Male
Click on the first or last page to see other SAL30M28 service manuals if exist.