SAL30M28 - Sony Digital Camera Service Manual (repair manual). Page 8

SAL30M28 (DT 2.8/30 MACRO SAM) (DT 30mm F2.8 Macro SAM)

2-5

1.  Install the rear mirror assy tube, aligning the installation hole of switch panel block with the select switch DC motor (geared).
2.  Fix it with three screws.

Installation hole of
Switch Panel Block

Rear Mirror Assy Tube

Select switch of
DC Motor (Geared)

1.  Affix the flexible of DC motor (geared) to the middle lens barrel assy.
2.  Connect the PC board joint flexible to the connector.

PC Board Joint Flexible

DC Motor (Geared)

Middle Lens Barrel Assy

Connector

1.  Fold the PC board joint flexible as shown in the illustration.
2.  Affix the PC board joint flexible along the reference.

PC Board Joint Flexible 

Reference for affixing

Crest folds

Valley folds

1.  Install the interception by inserting three pins of interception in the three holes of filter screw frame.

  Install it so that each cut portion of interception is located in SONY printing of the rear mirror assy tube.

Rear Mirror 
Assy Tube

SONY printing

Pins

Distance index

Holes

Main Unit Assy

Hole

Cut portion

Cut portion

Interception