Read Sony SAL30M28 Service Manual online
SAL30M28 (DT 2.8/30 MACRO SAM) (DT 30mm F2.8 Macro SAM)
4-1
Note:
After the service repair, perform the adjustments referring to this section.
4-1. PREPARATIONS
4-1-1. List of Service Tools and Equipments
Variable Transformer (Output voltage: AC 100 V) (Note 3)
Camera (One of DSLR-A700, SLT-A37/A57/A58/A65/A77/A99)
Memory Card
Screen (Art paper)
Tape Measure
Plane Mirror (For SLRs)
Adhesive bond (B-10): J-6082-612-A
Lens Adjustment Program (ActuatorCheckerSAM Ver X.XX.zip)
Color Calculator 2
Note:
Camera (One of DSLR-A700, SLT-A37/A57/A58/A65/A77/A99)
Memory Card
Screen (Art paper)
Tape Measure
Plane Mirror (For SLRs)
Adhesive bond (B-10): J-6082-612-A
Lens Adjustment Program (ActuatorCheckerSAM Ver X.XX.zip)
Color Calculator 2
Note:
Acquire the Lens Adjustment Program and Color Calculator 2 from the each HQ.
J-1
J-9
J-7
J-2
J-4
J-6
J-5
J-8
J-3
20
30
40
50
60
70
80
90
0
10
J-10
Personal computer
(Note 1)
(Note 1)
Luminance box
J-6082-581-A
J-6082-581-A
AE master lens
J-6082-597-A
J-6082-597-A
1000 mm Collimator
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
Lens test projector
J-6082-605-A
(Note 3)
J-6082-605-A
(Note 3)
Flange back tester
J-6082-606-A
J-6082-606-A
A-mount
attachment
J-6082-607-A
attachment
J-6082-607-A
Flange back gauge
(43.50mm)
J-6082-608-A
(43.50mm)
J-6082-608-A
Finished
Inspection
JIG
J-6082-710-A
(Note 4)
Inspection
JIG
J-6082-710-A
(Note 4)
M-BOX JIG
J-6082-722-A
(Note 5)
J-6082-722-A
(Note 5)
J-12
J-13
J-11
J-14
Universal wrench
J-6082-609-A
J-6082-609-A
Chip-A for
universal wrench
J-6082-609-1
universal wrench
J-6082-609-1
Chip-B for
universal wrench
J-6082-609-2
universal wrench
J-6082-609-2
Chip-C for
universal wrench
J-6082-609-3
universal wrench
J-6082-609-3
Fig.4-1-1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Note 1:
Personal Computer (PC)
(Color Calculator 2 installed)
OS: Windows
OS: Windows
Vista/7
MEMORY:
40 M Byte or more recommended
Hard disk free area: 15 M Byte or more recommended
USB terminal:
USB terminal:
Standard equipment
Graphics:
32,000 colors or more recommended VGA monitor
Note 2:
Attach the chart to the 1000 mm collimator as shown in Fig. 4-1-2.
Align the marks
1000 mm collimator
Chart
Fig.4-1-2
Note 3:
Connect the variable transformer (Output voltage: AC 100 V) to the lens test projector.
Note 4:
For connection of Finished Inspection JIG II, refer to 4-7-2. Connection of Finished Inspection JIG II and Startup of Lens Adjustment
Program (ActuatorCheckerSAM) .
Note 5:
M-Box jig is available in use for Finished Inspection jig (J-6082-645-A).
4. ADJUSTMENTS
Ver. 1.1 2015.07
Click on the first or last page to see other SAL30M28 service manuals if exist.