Read Sony SAL300F28G Service Manual online
HELP
SAL300F28G (2.8/300 G) (300mm F2.8 G)
5.
Install the tripod index of outer barrel to the aperture inner barrel, aligning with the filter insertion opening of aperture inner barrel.
6.
Apply two drops of adhesive bond (B-40) to the tips of six screws and tighten aperture inner barrel with six screws.
7.
Insert the connector of SW connection FPC block in the connector of switch base plate block.
8.
Install the switch base plate block to the outer barrel. Apply two drops of adhesive bond (B-40) to the tips of four screws and tighten
the switch base block with four screws.
Switch Base Block
Apply the adhesive bond (B-40)
SW Connection FPC Block
Aperture Inner Barrel
Filter Hoder Insertion Hole
Tripod Index
Outer Barrel
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Click on the first or last page to see other SAL300F28G service manuals if exist.