SAL24F20Z - Sony Digital Camera Service Manual (repair manual). Page 4

Read Sony SAL24F20Z Service Manual online

2-1
SAL24F20Z (Distagon 2/24 ZA T * SSM) (Distagon T * 24mm F2 ZA SSM)
2. DISASSEMBLY
NOTE FOR REPAIR
Make sure that the flat cable and flexible board are not cracked of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
When remove a connector, don t pull at wire of connector. It is possible that a wire is snapped.
When installing a connector, don t press down at wire of connector. 
It is possible that a wire is snapped.
Do not apply excessive load to the gilded flexible board.
UNIVERSAL WRENCH
In case of the following notches or holes are located in the lens block, etc during disassembling/
assembling the lens, Use the universal wrench.
Notches
Holes
How to Use
Universal wrench
J-6082-609-A
Chip-A for
universal wrench:
J-6082-609-1
Chip-B for
universal wrench:
J-6082-609-2
Chip-C for
universal wrench:
J-6082-609-3
Attach the chip-A, chip-B or chip-C to the universal wrench.
For the notches:  chip-A, chip-C
For the holes: 
chip-B
Match the universal wrench to the holes or notches of the lens block, etc.
Notches
Chip-A
or
Chip-C
Chip-A
or
Chip-C
Chip-B
Chip-B
Chip
Fixed screw
Fixed screw
Chip
Match the universal wrench
to the width of holes or notches.
Universal wrench
Holes
SERVICE TOOLS
Grease (FT-210):
7-640-018-91
Grease (NCPOP2B):
7-640-016-79
Grease (G-85):
J-6082-626-A
Grease (G-22):
J-6082-621-A
Adhesive bond (B-40):
J-6082-614-A
Adhesive bond (B-10):
J-6082-612-AA
FT-210
G-35
G-85
B-10
B-40
NCPOP2B
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
Page of 51
Display

Click on the first or last page to see other SAL24F20Z service manuals if exist.