SAL24F20Z - Sony Digital Camera Service Manual (repair manual). Page 6

Read Sony SAL24F20Z Service Manual online

2-3
HELP
Note for assembling and grease applying positions are shown.
SAL24F20Z (Distagon 2/24 ZA T * SSM) (Distagon T * 24mm F2 ZA SSM)
HELP01
Bond (B-10) : J-6082-612-A
1.   Apply adhesive bond (B-10) to the bottom point (half rice grain size) of the screw portion of the front barrel assy block, and then tight-
en the name ring.
Name Ring
Screw portion of the
front barrel assy block
Apply adhesive bond
(B-10) to the bottom
point
HELP02
Bond (B-10) : J-6082-612-A
Grease (G-35) : J-6082-621-A
1.  Apply the grease (G-35) to the middle barrel sliding surface of the focus ring.
Front Barrel Assy Block
Front Barrel
Assy Block
Focus Ring
Focus Ring
Apply the grease (G-35)
Apply the grease (G-35)
Middle barrel
sliding surface
Middle barrel
sliding surface
Cut view
2.  Apply the grease (G-35) to the focus ring sliding surface of the middle barrel and the  fixed barrel.
Middle Barrel
Fixed Barrel
Cut view
Apply the grease (G-35)
Focus ring sliding
surface
3.  Match the index on the unit with the index on the front barrel assy block, and install the front barrel assy block and the focus ring to the 
unit while inserting the two projections of the focus joint ring into the two holes in the front barrel assy block.
4.  Tighten three screws and apply the adhesive bond (B-10) to the heads of three screws.
Front Barrel Assy Block,
Focus Ring
Index
(Front barrel
assy block)
Projection
(Focus joint ring)
Hole
(Front barrel assy block)
Index
(Unit)
Apply the bond (B-10)
Page of 51
Display

Click on the first or last page to see other SAL24F20Z service manuals if exist.