SAL24F20Z - Sony Digital Camera Service Manual (repair manual). Page 7

2-4

SAL24F20Z (Distagon 2/24 ZA T * SSM) (Distagon T * 24mm F2 ZA SSM)

Bond (B-10) : J-6082-612-A
Grease (G-35) : J-6082-621-A
Grease (NCPOP2B) : 7-640-016-79

1.   Apply the grease (G-35) to the front barrel assy block sliding surface of the focus ring.
2.   Apply the grease (NCPOP2B) to the front barrel assy block sliding surface of the focus ring.

Focus Ring

Apply the grease (G-35)

Apply the grease (NCPOP2B)

Front barrel assy block
sliding surface

Conductive spring
sliding surface

3.  Apply the grease (G-35) to the focus ring sliding surface of the front barrel assy block.

Focus ring sliding surface

Front Barrel Assy Block

Apply the grease (G-35)

4.  Fix the conductive spring to the front barrel assy block with the screw, apply the bond (B-10) to the head of the screw.
5.  Apply the grease (NCPOP2B) to the focus ring sliding surface of the conductive spring.

Conductive
Spring

Front Barrel Assy Block

Apply the grease (NCPOP2B)

Apply the bond (B-10)

6.  Install the focus ring to the front barrel assy block.

  Take care not to catch the conductive spring.

  After the focus ring has been installed, check the conductive spring through the hole in the focus ring to confirm that it is not 

caught.

Conductive Spring

Conductive Spring

Focus Ring

Focus Ring

Front Barrel Assy Block

Hole

Hole

Grease (G-85) : J-6082-626-A

1.  Apply the grease (G-85) to the indicated portion of the mount assy block.

Back side of claw
(3 locations)

Inner side

Outer side

Entrance
side

Entrance side

Entrance side

Entrance side

Cut view

Cut view

Apply the grease
(G-85)

Apply the grease
(G-85)

Mount Assy Block

Mount Assy Block