Read Sony SAL24F20Z Service Manual online
2-5
SAL24F20Z (Distagon 2/24 ZA T * SSM) (Distagon T * 24mm F2 ZA SSM)
HELP05
1. Fold upward the flexible board of switch assy at the locations shown in the figure.
Switch Assy
Valley fold
2. Inserting the flexible board of Switch assy in the hole of fixed barrel, affix the Switch assy to the fixed barrel by the SW adhesive sheet.
SW Adhesive Sheet
(Included in switch assy)
(Included in switch assy)
Switch Assy
Flexible
board
board
Flexible board
SW Adhesive Sheet
Fixed Barrel
3. Affix the flexible board (Switch Assy) to the step of inside of the fixed barrel.
Note:
Affix it with no place under the flexible board.
4. Affix the three polyimide sheets cut as instructed to the three portion on the flexible board.
Step of inside of the fixed barrel.
Flexible
board
board
Polyimide Sheets
(10 x 15mm)
(10 x 15mm)
HELP06
1. Routing the flexible board of the stator (ultrasonic motor) in the figure.
Flexible board
Stator (Ultrasonic motor)
HELP07
1. Affix the distance scale plate to the distance scale plate base, aligning standard hole of the distance scale plate base with white line of
distance scale plate.
Distance Scale Plate
Standard hole
White hole
Distance Scale Plate Base
Click on the first or last page to see other SAL24F20Z service manuals if exist.