Read Sony SAL2470Z2 Service Manual online
2-7
SAL2470Z2 (Vario-Sonnar 2.8/24-70 ZA SSM II) (Vario-Sonnar T* 24-70mm F2.8 ZA SSM II)
HELP 08
Adhesive bond (B-40): J-6082-614-A
1. Turn the U groove of the Super Sonic Wave Motor ASSY until bumping from inside to clockwise.
2. Set the focus to infinity end in the Super Sonic Wave Motor ASSY.
2. Set the focus to infinity end in the Super Sonic Wave Motor ASSY.
U Groove
Lens ASSY
Turn the clockwise
U Groove
Super Sonic Wave
Motor ASSY
Motor ASSY
Set the focus to infinity end.
3. While inserting the key lever of the Super Sonic Wave Motor ASSY into the U groove on the Lens ASSY.
4. Confirm that the key lever of the Super Sonic Wave Motor ASSY is the U groove on the Lens ASSY.
5. Apply the adhesive bond (B-40) to the indicated portions, and tighten the three screws.
4. Confirm that the key lever of the Super Sonic Wave Motor ASSY is the U groove on the Lens ASSY.
5. Apply the adhesive bond (B-40) to the indicated portions, and tighten the three screws.
Key Lever
Super Sonic Wave
Motor ASSY
Motor ASSY
Lens ASSY
U Groove
Super Sonic Wave
Motor ASSY
Motor ASSY
U Groove
Apply
adhesive bond (B-40)
adhesive bond (B-40)
HELP 09
Oil (O-20): J-6082-610-A
Adhesive bond (B-40): J-6082-614-A
Adhesive bond (B-40): J-6082-614-A
Apply adhesive
bond (B-40)
bond (B-40)
Preset Ring
Holding Plate
Holding Plate
Stopper Screw
Spring Guide ASSY
Aperture Preset Ring
Main Spring
Note (Assembling)
Align the Lever (small) of the
Aperture Preset Ring with the A part.
Aperture Preset Ring with the A part.
Preset Ring
Holding Plate
Holding Plate
Install it so that R side may become
the aperture preset ring side.
the aperture preset ring side.
Note (Assembling)
Lever (small)
A part
(O-20)
(Dip thoroughly)
(Dip thoroughly)
Click on the first or last page to see other SAL2470Z2 service manuals if exist.