Read Sony SAL2470Z2 Service Manual online
2-4
SAL2470Z2 (Vario-Sonnar 2.8/24-70 ZA SSM II) (Vario-Sonnar T* 24-70mm F2.8 ZA SSM II)
HELP 03
Adhesive bond (B-10): J-6082-612-A
1. Set the zoom to WIDE end.
2. Assemble the zoom linkage plate and POM cap, attach the Zoom Linkage Plate to insertion hole of Zoom Linkage Plate of this lens.
Note:
Align the direction that the POM cap installs as shown in the figure below.
Zoom Linkage
Plate
Plate
Zoom Linkage
Plate
Plate
For inside of concave part
Inside
Outside
POM Cap
Insertion hole of
zoom linkage plate
zoom linkage plate
POM Cap
3. Tighten the two screws, Apply the adhesive bond (B-10) to the indicated portions.
Zoom Linkage
Plate
Plate
Apply
adhesive bond (B-10)
adhesive bond (B-10)
HELP 04
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-85): J-6082-626-A
Grease (G-116): J-6082-628-A
Grease (FT-210): 9-913-200-37
Grease (G-85): J-6082-626-A
Grease (G-116): J-6082-628-A
Grease (FT-210): 9-913-200-37
1. Apply anti-diffusion agent (A-20) to the indicated portions of Zoom Barrel.
Apply anti-diffusion
agent (A-20)
(All circumference)
agent (A-20)
(All circumference)
Apply anti-diffusion
agent (A-20)
(All circumference)
agent (A-20)
(All circumference)
Zoom Barrel
2. Apply grease (FT-210) to the indicated portions of Zoom Barrel.
3. Apply grease (G-116) to the indicated portions of Zoom Barrel.
3. Apply grease (G-116) to the indicated portions of Zoom Barrel.
Apply grease (FT-210)
Apply grease (FT-210)
Apply grease (FT-210)
(All circumference)
(All circumference)
Apply all circumference
Apply all
circumference
circumference
Apply grease (FT-210)
Apply grease (G-116)
(All circumference)
(All circumference)
Apply partially
Apply partially
4. After grease (FT-210) dries, apply grease (G-85) to the indicated portions of Zoom Barrel.
Apply grease (G-85)
Apply grease (G-85)
Apply partially
Click on the first or last page to see other SAL2470Z2 service manuals if exist.