Read Sony SAL2470Z2 Service Manual online
2-2
SAL2470Z2 (Vario-Sonnar 2.8/24-70 ZA SSM II) (Vario-Sonnar T* 24-70mm F2.8 ZA SSM II)
2-1. DISASSEMBLY
REPAIR PART LIST
REPAIR PART LIST
REPAIR PART LIST
9
8
2
1
7
3
4
5
q;
8
6
9
6
4
5
3
2
1
3rd-4th
Adjustment Washer
Adjustment Washer
4th Lens ASSY
First Moving Frame
4th Hold Washer
Super Sonic
Wave Motor ASSY
Wave Motor ASSY
Lens ASSY
1
2
4
6
5
3
7
qa
Note 1
Note 2
Note 3
Be sure avoiding replacement of Mirror Tube Block
ASSY as far as possible.
If replacement of it should be need, you convey the
message to your user that changing of the “Carl Zeiss
Serial No.” is needed, and then you may obtain user's
agreement, and it replace.
ASSY as far as possible.
If replacement of it should be need, you convey the
message to your user that changing of the “Carl Zeiss
Serial No.” is needed, and then you may obtain user's
agreement, and it replace.
B-10
B-40
B-40
B-40
B-10
B-10
B-10
A-20
B-10
B-40
HELP01
HELP02
HELP03
HELP05
HELP08
HELP07
HELP11
HELP06
HELP04
Install the zoom rubber ring
so that the step side face
to the 1st lens group.
so that the step side face
to the 1st lens group.
Install the Focus Rubber
Ring so that the lower side
of step face to mount side.
Ring so that the lower side
of step face to mount side.
HELP09
HELP10
1st Lens ASSY (Note 1)
Protection Sheet G1
2nd Lens ASSY (Note 2)
Cam Ring Light Shield Barrel
Mirror Tube Block ASSY (Note 3)
Focus Rubber Ring
Protection Sheet
Rear Outer
Barrel ASSY
Barrel ASSY
q;
Back Adjustment
Washer
Rear Light
Shield Barrel
Shield Barrel
Lens Mount Block
Outer Barrel
ASSY
ASSY
Encoder Printed
Wiring Board
Wiring Board
Brush (Focus)
Zoom Rubber Ring
Super Sonic Wave
Motor Flexible
Motor Flexible
Brush (Zoom)
Zoom Linkage Plate
GND Bracket
Zoom Barrel
Anti Slip Rubber
Anti Slip Rubber
Switch ASSY
MR ASSY
G4th-5th Adjustment
Washer
Washer
Universal wrench
J-6082-609-A
J-6082-609-A
1st Lens ASSY
Chip-A for
universal wrench:
J-6082-609-1
universal wrench:
J-6082-609-1
2Gun Tightening Jig
J-6082-681-A
J-6082-681-A
Turn the inner side of
the jig in the arrow direction.
the jig in the arrow direction.
Hold the outer side of
the jig with hand not to turn.
the jig with hand not to turn.
In case of assembling or
disassembling, be sure to
adjust the focus to around 0.7.
disassembling, be sure to
adjust the focus to around 0.7.
G-85
G-85
G-62
G-116
FT-210
FT-210
G-115
G-116
G-85
O-20
FT-210
Install the Protection Sheet
so that the glossy surface
face to the Lens ASSY.
so that the glossy surface
face to the Lens ASSY.
Install the Protection Sheet
G1 so that the glossy surface
face to Ornament Plate Tube.
G1 so that the glossy surface
face to Ornament Plate Tube.
Click on the first or last page to see other SAL2470Z2 service manuals if exist.