SAL2470Z2 - Sony Digital Camera Service Manual (repair manual). Page 9

2-6

SAL2470Z2 (Vario-Sonnar 2.8/24-70 ZA SSM II) (Vario-Sonnar T* 24-70mm F2.8 ZA SSM II)

1.  Fold upward the flexible board of Switch ASSY at the locations shown in the figure.

 

Switch ASSY

Valley fold

2.  Inserting the flexible board of Switch ASSY in the hole of outer barrel, affix the Switch ASSY to the Outer Barrel by the SW adhesive 

sheet.

 

Flexible board (Switch ASSY)

Flexible Board (Switch ASSY)

SW adhesive sheet

Switch ASSY

Outer Barrel

SW adhesive sheet 
(Included in Switch ASSY)

3.  Affix the flexible board (Switch ASSY) to the step of inside of the Outer Barrel.

 Affix it with no place under the flexible board.

 

Flexible board (Switch ASSY)

Affix it with no place under 
the flexible board.

Step of inside of the Outer Barrel

1.  Peel off the released paper of encoder printed wiring board, smooth out the bended encoder printed wiring board. (Fig.a)

 

Smooth out the bended encoder printed wiring board

Fig.a

Released Paper

2.  Affix the encoder printed wiring board aligning at the lower left of step of Outer Barrel. (Fig.b)

 Affix the encoder printed wiring board from reference to A part. (Fig.c)

 

Reference to affixing

A Part

Fig.b

Fig.c

Outer Barrel

3.  Peel off the released paper of the remainder, bend along the outer shape of Outer Barrel. (Fig.d/Fig.e)

 

Released Paper

Fig.d

Fig.e

Bend the encoder printed wiring board

4.  Affix the encoder printed wiring board aligning at the lower right of step of Outer Barrel. (Fig.f)
5.  Corrugate B part of the encoder printed wiring board from the outside internally. (Fig.g)
6.  Bend the B part of encoder printed wiring board to the lower direction of step of Outer Barrel. (Fig.h)

 

Fig.f

Fig.g

Fig.h

Reference to affixing

B Part

B Part