SAL18552 - Sony Digital Camera Service Manual (repair manual). Page 6

2-3

Note for assembling and grease applying positions are shown.

SAL18552 (DT 3.5-5.6/18-55 SAM Ⅱ) (DT 18-55mm F3.5-5.6 SAM II)

1.  Remove three screws fixing the rear barrel assy.
2.  Set the AF/MF switch to AF.
3.  Push the rear barrel assy to the mount side.
4.  Remove the switch panel block by inserting a Philips screwdriver or a knife from the focus ring side.

 

Switch Panel Block

Push the rear barrel assy to the mount side 
and insert a philips screwdriver or a knife.

Philips screwdriver or knife.

1.  Set the knob of switch panel block to AF.
2.  Peel the released paper from the switch panel block and install the switch panel block.

 

Switch Panel Block

Knob

1.  Set the zoom to a position other than the TELE end and install the zoom key stopper.
2.  Push clockwise the zoom key stopper.

  When installing the rear barrel assy, insert the projection a of rear barrel assy in the groove of zoom key stopper.

 

Zoom Key Stopper

Rear Barrel Assy

Set the zoom to a position
other than the TELE end

Push clockwise

Projection A

Groove of the
Zoom Key Stopper