SAL18552 - Sony Digital Camera Service Manual (repair manual). Page 12

2-9

SAL18552 (DT 3.5-5.6/18-55 SAM Ⅱ) (DT 18-55mm F3.5-5.6 SAM II)

Grease (FT-210): 9-913-200-37
Grease (SG-310): 9-913-200-36

1.  Apply the grease (SG-310) to the grooves of fixed sleeve. (Three locations)

  Apply the grease so that the groove is filled with grease.

2.  Apply the grease (FT-210) to the wall of oblong hole of fixed sleeve. (Six locations)

 

Fixed Sleeve

Apply the grease (SG-310)
 to the grooves (Three locations) 
(Groove is filled)

Apply the grease (FT-210) 
to the wall of oblong hole 
(Six locations)

3.  Apply the grease (SG-310) to the indicated portions of GP1 moving barrel. (Six locations)

  Apply the grease so that the grease remains on the wall.

 

GP1 Moving Barrel

Apply the grease (SG-310) 
(Six locations)

4.  Apply the grease (SG-310) to the helicoids of zoom cam sleeve. (Six locations)

  Apply the grease so that the grease remains on the wall.

 

Apply the grease (SG-310) 
(Three locations)

Zoom Cam Sleeve

Apply the grease (SG-310) 
(Three locations)

1.  Align the cut portions A of fixed sleeve with the projections of GP1 moving barrel and drop the fixed sleeve in GP1 moving barrel.
2.  While holding the fixed sleeve and the GP1 moving barrel, install the zoom cam sleeve, aligning the projections of zoom cam sleeve 

with the cut portions B of fixed sleeve.

 

Fixed Sleeve

GP1 Moving Barrel

Zoom Cam Sleeve

Fixed Sleeve

GP1 Moving Barrel

Cut Portion A

Cut Portion B

Cut Portion B

Cut Portion B

Projection

Projection

3.  Align the cut portions A of fixed sleeve with the projections of GP1 moving barrel again and assemble the zoom cam sleeve by rotating 

it counterclockwise (viewing from the mount side).

 

Fixed Sleeve

Zoom Cam Sleeve

Fixed Sleeve

GP1 Moving 
Barrel

Cut Portion A

Projection

Rotate counterclockwise 
the Zoom Cam Sleeve 
(Viewing from the mount side)