Read Sony SAL18552 Service Manual online
2-10
SAL18552 (DT 3.5-5.6/18-55 SAM Ⅱ) (DT 18-55mm F3.5-5.6 SAM II)
HELP20
1. When affixing the ZF flexible PWB, align it with the affixing index as shown in the figure below.
ZF Flexible PWB
Fixed Hold Ring
Affixing index
HELP21
Grease (FT-210): 9-913-200-37
Grease (SG-310): 9-913-200-36
Grease (SG-310): 9-913-200-36
1. Apply the grease (SG-310) to the indicated portions of focus drive ring. (Seven locations)
Apply the grease (SG-310)
(Three locations)
(Three locations)
Focus Drive Ring
Focus Drive Ring
Apply the grease (SG-310)
(Four locations)
(Four locations)
2. Apply the grease (FT-210) to the inner grooves of focus drive ring. (Three locations)
Apply the grease (FT-210)
(Three locations)
(Three locations)
Focus Drive Ring
HELP22
1. Aligning the groove at the start of focus gear with the projection near the gear inserting portion of fixed hold ring, insert the focus drive
ring.
2. Rotate the focus drive ring so that the installing portion of focus stopper comes to the oblong hole of fixed hold ring.
Fixed Hold Ring
Focus Drive Ring
Focus Drive Ring
Fixed Hold Ring
Oblong Hole
Groove
Projection
Gear inserting portion
Start of Focus Gear
Installing portion of
Focus Stopper
Focus Stopper
3. Install the focus stopper and fix it with two screws.
Focus Stopper
Click on the first or last page to see other SAL18552 service manuals if exist.