Read Sony SAL135F28 Service Manual online
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP09
Adhesive bond (B-10): J-6082-612-A
1.
Attach the chip holdr to the M aperture connecting plate A with the two screws as shown in the figure.
2.
Cut off one of six terminals of the brush and makes it to five as shown in the figure.
3.
Tighten the brush with the two screws as shown in the figure.
4.
Apply the adhesive bond (B-10) to the two instruction portions as shown in the figure.
5.
Loosen the two screws tightened in step 1.
6.
Adjust the position of the chip holder so that the terminals of the brush are surely contact with the three patterns of the main flexible
unit, and tighten the two screws loosened in step 5.
7.
Apply the adhesive bond (B-10) to the two instruction portions as shown in the figure.
Apply the adhesive bond
(B-10) (Two areas)
(B-10) (Two areas)
Brush
Screws (Two areas) (After adjustment,
apply the adhesive bond (B-10))
apply the adhesive bond (B-10))
Chip Holder
Brush
Cut off the Bottom Terminal
Apply the Adhesive Bond
(B-10) (Two areas)
(B-10) (Two areas)
Apply the Adhesive Bond (B-10) (Two areas)
Screws (Two areas)
Main Flexible Unit
Brush
Click on the first or last page to see other SAL135F28 service manuals if exist.