Read Sony SAL135F28 Service Manual online
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
M Aperture Operation Ring
Index Ring
Click Spring
Steel Ball
M Aperture Operation Ring
M Aperture Connecting Plate B
M Aperture Connecting Plate A
Inside of Tube
Apply the Adhesive Bond
(B-40) (Two areas)
(B-40) (Two areas)
Screws
HELP12
Adhesive bond (B-10): J-6082-612-A
Adhesive bond (B-40): J-6082-614-A
Grease (G-85):
J-6082-626-A
1.
Attach the M aperture connecting plate B to the M aperture connecting plate A, and apply the adhesive bond (B-40) to the two screws
and tighten them as shown in the figure.
Note:
Be sure to attach the M aperture connecting plate B so that the rounded edge of it faces toward inside of the tube as shown in
the figure.
2.
Attach the M aperture connecting plate A to the M aperture operation ring, and tighten them with the two screws as shown in the
figure.
3.
Apply the adhesive bond (B-10) to the two areas as shown in the figure.
4.
Apply the grease (G-85) to the instruction portion of the M aperture operation ring as shown in the figure.
5.
Set the click spring and steel ball to the index ring, and assemble the M aperture operation ring to the index ring from the direction
shown in the figure.
6.
After assembling, check that the proper click exists when rotating the M aperture operation ring.
M Aperture Operation Ring
Apply the Grease (G-85)
(All circumference)
(All circumference)
Apply the Adhesive Bond (B-10) (Two areas)
Click on the first or last page to see other SAL135F28 service manuals if exist.