Read Sony SAL135F28 Service Manual online
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP04
Adhesive bond (LOCTITE 460)
Note:
Use the adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
1.
Apply adhesive bond (LOCTITE 460) to the tip of the stopper screw, and attach it to the lens mount riveting block.
2.
Linking the lever of the preset ring block with the A iris joint plate, align the oblong hole of the lens mount riveting block with the
mount index chip and tighten four screws shown in the figure.
3.
Move the lever of the preset ring block, and check that the preset ring block moves smoothly, and the iris opens and closes smoothly.
4.
Check that the focus ring rotates smoothly from near distance end to infinity position.
Screws
Oblong Hole
Lever of the Preset Ring Block
Mount Index Chip
A Iris Joint Plate
Lens Mount Riveting Block
Stopper screw
Apply the adhesive bond (LOCTITE 460)
Click on the first or last page to see other SAL135F28 service manuals if exist.