Read Sony SAL135F18Z Service Manual online
HELP
SAL135F18Z (Sonnar 1.8/135 ZA) (Sonnar T
*
135mm F1.8 ZA)
HELP09
In case that the function lever does not remove to the rear ring assy (No need of aperture diameter adjustment)
Adhesive bond (B-10): J-6082-612-A
1.
Rotate counterclockwise the iris control lever of iris block inside the lens with tweezers so that the opening of iris becomes minimam.
2.
Through the contact flexible between the rear ring assy and preset ring.
3.
Combine the groove at the tip of function lever to the pin of iris block.
4.
Install so that align the index pin of focus hold barrel block to the index hole of the rear ring assy.
Note:
After installing, confirm that the index pin is securely inserted in the index hole.
5.
Fix the rear ring assy with four screws, tightening screws in orders shown in figure.
Note:
After installing the function lever, confirm that the iris opens and closes when the lever of preset ring is turned.
6.
Apply the adhesive bond (B-10) to the heads of four screws.
Note:
Apply the adhesive bond to the outer diameter side of head of screws and be careful for the bond not to flow in the groove
for preset ring.
1
3
4
2
Screws
(Apply the adhesive bond (B-10))
(Apply the adhesive bond (B-10))
Screws
(Apply the adhesive bond (B-10))
(Apply the adhesive bond (B-10))
Index pin
Index hole
Rear Ring Assy
Iris Control Lever
Iris becomes minimam
Rear Ring Assy
Click on the first or last page to see other SAL135F18Z service manuals if exist.